DAPU DP-FP-2500A fence mesh welding machine
The DAPU DP-FP-2500A welds wire mesh for fence panels. DAPU lists a wire diameter range of 3–6 mm. For 3D panels, provide the mesh drawing and bend positions to coordinate welding and downstream bending. During a trial, inspect panel width, mesh pitch and weld quality with the line and cross wire diameters used in production.
Price on request
Manufacturer: DAPU · China
Technical specification
| Welding width | max. 2500 mm (1200A: 1200 mm; 3000A: 3000 mm) |
|---|---|
| Wire diameter | 3–6 mm |
| Line wire spacing | 50–300 mm |
| Cross wire spacing | min. 25 mm / min. 12.7 mm |
| Panel length | max. 6000 mm |
| Welding speed | 50–75 times/min |
| Wire feeding | pre-straightened and pre-cut wires |
| Welding electrodes | max. 48 (1200A: 25; 3000A: 61) |
| Welding transformers | 125 kVA × 6 (1200A: × 3; 3000A: × 8) |
| Machine size | 4.9 × 3.4 × 1.6 m |
| Weight | 4 t (1200A: 2 t; 3000A: 4.5 t) |
Standard equipment
- Touch screen control
- Panasonic, Schneider, ABB and Igus components
- Servo pulling system
- Water cooling
Similar machines
- Welding + V-bending + stacking
DAPU DP-FP-2500AN automatic 3D fence panel production line
The DAPU DP-FP-2500AN integrates wire feed, welding, servo-controlled bending and stacking for 3D fence panels. Specify the heaviest panel, wire pitches and bend count. At acceptance, follow a full run from wire feed to a finished stack. Verify stack height, bundle outfeed and throughput at your panel geometry.
DAPUPrice on request - Wire preparation
DAPU GT3-6H CNC wire straightener and cutter for 3–6 mm wire
The DAPU GT3-6H straightens coiled wire and cuts rods for mesh welders. The listed diameter range is 3–6 mm. Specify wire type and the lengths required for line and cross wires. Test straightness and length variation on short and long runs. Match the collection arrangement to the loading method on the welding line.
DAPUPrice on request - Welding + bending + stacking
Sade HLW2500A automatic line for 2D and 3D fence panels
The HLW2500A is the Sade configuration listed for automated production of flat 2D and bent 3D wire mesh fence panels. Specify wire diameters, mesh pitch and the reinforcement bend geometry for each panel. Review the proposed line layout to identify the automated operations and what is involved in changing from one panel type to the other.
Sade (LN)Price on request - Welding + bending · semi-automatic
Sade HLW2500B semi-automatic 3D fence panel welding and bending line
The HLW2500B combines mesh welding and forming the reinforcement bends in 3D fence panels. To specify the semi-automatic line, define the panel dimensions, wire diameters and number of bends over the panel height. Confirm the operator positions, transfers between stations and discharge of finished panels in the proposed layout.
Sade (LN)Price on request - Welding + bending + robot stacking
Kaiye KY-RWM-2500 CNC 3D fence panel line with robot stacking
The Kaiye KY-RWM-2500 configuration listed in Machory is intended for series production of welded 3D panels with robot stacking. Specify maximum panel mass, stacking orientation and bundle dimensions along with the mesh pattern. Check the integration of welding, bending and stacking in the quoted line. Request a demonstration with the largest panel and confirmation of the exact configuration code.
Kaiye68 860 $ (≈ 61 532 €) · per set for 1–2 sets - Welding + bending
Kaiye KY-RWM-2000 welding line for 2 m 3D fence panels
The Kaiye KY-RWM-2000 is a welding line for fence panels with a 2 m working width. For a 3D panel, provide the mesh opening, line and cross wire diameters and positions of the reinforcing bends. Ask for a process layout showing feed, bending and outfeed for the automatic or semi-automatic build. Confirm operator stations and output at your panel size.
Kaiye62 350 $ (≈ 55 714 €) · per set for 1–2 sets - Mesh welding · modular line
IDEAL Type GA modular mesh welding line
The IDEAL GA family can be configured around a particular product, such as a mesh panel, a flat-bar assembly or a wire cable tray. Feed choices and downstream steps, including trimming or bending where specified, determine the line layout. Provide a finished part drawing with tolerances and the expected production mix to size the equipment.
IDEALPrice on request - Mesh welding · medium frequency
IDEAL EasyLineWelder 816 wire mesh welding machine
The EasyLineWelder 816 is IDEAL's standardized machine for welded wire mesh products. Submit drawings with panel dimensions and the diameter and spacing of both longitudinal and cross wires. Use those details to check the working field against the product range and confirm the feed arrangement for the intended run.
IDEALPrice on request