What do you want to produce

Start from the finished product. We show the machines for every operation.

Showing 1–8 of 13 productions

Metal

Fences and gates, railings and stairs, warehouse racking and an in-house powder coating shop.

Fences and gates

Machines for fences from profiles, welded 3D panels, lamellas, wrought iron and gates.

• Fence from metal profiles – 8 steps
• Welded 3D panels – 5 steps
• Lamella fence – 3 steps
• Wrought-iron fence – 8 steps
• Gates – 7 steps

Railings and stairs

Machines for stainless and steel railings, straight metal stairs and spiral stairs.

• Stainless tube railings – 6 steps
• Steel and wrought-iron railings – 7 steps
• Straight steel stairs – 7 steps
• Spiral stairs – 6 steps

Powder coating shop

Equipment for surface preparation, powder application and curing – a batch shop or a conveyor line.

• Batch shop: booth + box oven – 4 steps
• Conveyor line – 5 steps

Metal warehouse racking

Machines for pallet racking in 9 steps – uprights, beams, connectors, bracing, coating and frame assembly.

• Pallet racking – 9 steps

Windows and doors

PVC and aluminium windows and doors – a separate route for each material.

PVC and aluminium windows – in preparation

Machines for PVC and aluminium windows and doors – a separate route for each material.

PVC windows

1. Cutting the profiles at 45°
2. Steel reinforcement
3. Drainage slots and lock holes
4. End milling of the mullions
5. Welding the frames
6. Corner cleaning
7. Cutting the glazing beads
8. Hardware and glazing

Aluminium windows

1. Cutting the profiles at 45°
2. Holes for locks and handles
3. End milling
4. Corner crimping
5. Hardware and glazing
6. Painting the profiles

Wood and furniture

Cabinet furniture, solid parquet and pallets. Parquet and pallets use the same saws and kilns.

Kitchens, wardrobes and cabinet furniture – in preparation

Machines for cabinet furniture from chipboard and MDF – with a panel saw or with CNC nesting.

With a panel saw

1. Cutting the boards
2. Edge banding
3. Drilling for fittings and hinges
4. Assembly
5. MDF fronts with foil
6. Lacquered fronts

With CNC nesting

1. Cutting and drilling on a CNC router
2. Edge banding
3. Assembly
4. MDF fronts with foil
5. Lacquered fronts

Solid parquet – in preparation

Machines for solid tongue-and-groove parquet boards – unfinished or with a factory finish.

Unfinished

1. Sawing the logs
2. Kiln drying
3. Ripping
4. Cross-cutting and defect removal
5. Tongue-and-groove profiling
6. End profiling
7. Sorting and packing

With a factory finish

1. Sawing the logs
2. Kiln drying
3. Ripping
4. Cross-cutting and defect removal
5. Tongue-and-groove profiling
6. End profiling
7. Sanding
8. UV lacquer or oil finishing
9. Sorting and packing

Wooden pallets – in preparation

Machines for wooden pallets from ready-cut boards or from logs.

From ready-cut boards

1. Cross-cutting the boards
2. Blocks – sawn or pressed
3. Nailing the pallets
4. Heat treatment

From logs

1. Sawing the logs
2. Ripping into boards
3. Cross-cutting the boards
4. Blocks – sawn or pressed
5. Nailing the pallets
6. Heat treatment

Is your product missing or still in preparation?

Describe the product, the material, the capacity you want and the machines you already have – we ask the manufacturers and prepare the route. Describe your project