Weni WS-CM enclosed CO₂ laser for non-metals and thin metal

The Weni WS-CM combines enclosed CO₂ cutting and engraving of non-metals with a head for selected thin metal sheets. It is intended for mixed work such as acrylic parts and metal inserts for the same product. Estimate how often materials change and check head and gas setup for each process. For long stock, confirm the clear feed opening and external support. Use a fine engraving and a separate metal contour to evaluate both operations.

from 16 014 € (≈ 17 921 $) · net, base configuration

Manufacturer: Weni Solution · China

Technical specification

Standard equipment

• Lifting pass-through / knife table
• Leadshine high-precision stepper motors
• Honeycomb overlay option
• Compressor
• Glass tube CO2, RECI, 10.6 µm
• Professional CW cooling system
• RDWorks
• Efficient fan
• Quartz lenses
• Linear guides (THK, PMI, Hiwin, other)
• Wi-Fi
• Ruida controller
• Instructions in PL / EN
• Warranty up to 5 years

Similar machines

• CO2 · open · non-metals

  Weni WS-B open-table CO₂ laser for non-metals

  The Weni WS-B is an open-table CO₂ laser for cutting and engraving non-metal sheets. Its 1300 × 2500, 1500 × 3000 and 2000 × 3000 mm formats can handle full boards for signs, displays and decorative panels. Match the bed to purchased stock and the space needed to load it. Check how small parts sit on the honeycomb support. Trial your acrylic or plywood to assess edge finish, fine contours and extraction requirements.

  Weni Solution

  from 11 026 € (≈ 12 339 $) · net, base configuration
• CO2 · enclosed · non-metals

  Weni WS-C enclosed CO₂ laser for cutting and engraving

  The Weni WS-C is an enclosed CO₂ laser range for cutting and engraving non-metals. The 1006, 1309, 1610 and 1810 sizes cover compact workstations and wider beds for panels. The range uses RECI laser tubes. For nameplates and personalised parts, compare fine lines, small-letter legibility and batch times. If you engrave cylindrical items, check rotary fixture dimensions and remaining working height. Specify extraction for the materials in your orders.

  Weni Solution

  from 7 876 € (≈ 8 814 $) · net, base configuration
• CO2 · open · metal + non-metal

  Weni WS-BM CO₂ laser for non-metals and thin metal

  The Weni WS-BM is an open-bed CO₂ laser for cutting and engraving non-metals, with a head that can also cut selected thin metals. The range comes in 1325, 1530 and 2030 formats with RECI W6 or W8 tubes, depending on the version. For signs or exhibition work, request samples in both the non-metal stock and the intended thin metal inserts. Verify alloy, thickness and assist gas for metal cutting. Check focus setup and engraving quality separately on the board materials.

  Weni Solution

  from 22 184 € (≈ 24 826 $) · net, base configuration
• CO2 · conveyor · fabrics

  Weni WS-TC conveyor CO₂ laser for textile cutting

  The Weni WS-TC is a CO₂ laser for textiles and other compatible flexible non-metals. Its conveyor bed feeds material through the cutting area. Depending on the configuration, it can use a roll feeder and two synchronised heads. For apparel or upholstery, size the bed from roll width and pattern layout. Check tracking over a long feed and whether cut contours remain aligned. For a two-head trial, use a repeatable layout in both zones and measure the full batch time.

  Weni Solution

  from 18 639 € (≈ 20 859 $) · net, base configuration
• CO2 · open · 2 heads

  Weni WS-TLC W4×2 twin-head CO₂ laser for strip cutting

  The Weni WS-TLC W4×2 is a specialised open CO₂ cutter for strips of compatible non-metal material. This configuration has two RECI W4 tubes and two cutting heads for repeat strip cutting to a specified size. Provide strip width, thickness, composition and finished-length tolerance. Check feeding with the shortest and longest blanks. Use both heads in a trial to assess edge finish and repeatability along the strip.

  Weni Solution

  from 5 132 € (≈ 5 743 $) · net, base configuration