ZLM Liming roll forming line for fence posts and palisade sections

The ZLM Liming line cold forms posts and palisade sections from steel strip. Define the two product types on separate drawings with holes, folds and fixing dimensions. Ask the builder to specify roll sets, cut-off tooling and the changeover steps for each section. Test the samples against the actual brackets and fasteners used in your fence system.

35 000 $ (≈ 31 275 €) · per set, delivery not included

Manufacturer: ZLM (Liming) · China

Technical specification

Standard equipment

• 5 t hydraulic uncoiler
• Hydraulic pre-cut
• 18-stage roll former
• Hydraulic post-cut
• Siemens PLC and touch screen
• 6 m run-out rack

Similar machines

• Punching + forming + cutting

  Linbay roll forming line for peach or Z mesh fence posts

  The Linbay mesh fence line is configured to the selected post section, including peach or Z profiles. Define the open-side width, slot shape and points of contact with the panel. Confirm how the section is closed or secured for your drawing. Fit sample posts to an actual panel and check the top, middle and bottom connections.

  Linbay

  Price on request
• Punching + forming + flying cut

  Linbay automatic U-channel post line with 110 t press

  The Linbay automatic line combines pre-punching on a 110 t press with roll forming of U-channel posts. Specify the flat blank and where its holes should sit after the channel is formed. In the trial, check the first hole-to-end distance and repeatability on short and long posts. Confirm the included dies and forming rolls.

  Linbay

  Price on request
• Forming + flying cut

  Linbay fence post roll forming line with flying cut-off

  The Linbay flying cut-off line cuts each fence post as the section travels through the machine. It suits longer repeat runs of a single cross-section. Verify length accuracy at production speed and the position of holes relative to both ends. Plan the support and receiving area for the longest post after cut-off.

  Linbay

  Price on request
• Forming + stop-to-cut

  Linbay stop-to-cut fence post roll forming line

  On this Linbay line, feed pauses for each cut and the tool stays fixed to the machine. Size the build around the number of posts, the length range and the frequency of order changes. A run of the shortest parts shows how stopping affects real cycle time. Measure finished lengths and inspect section shape at the cut.

  Linbay

  Price on request
• Forming + hydraulic cutting

  Yanwu YWpeach-8 automatic peach-profile fence post line

  The Yanwu YWpeach-8 automatically forms peach-profile posts for wire mesh fence panels. The slot geometry and pitch need to match the wires that engage with the post. Supply the section, strip thickness, finish and panel connection drawing with the enquiry. Request a sample post and check the fit along the full panel height.

  Yanwu

  40 000 $ (≈ 35 743 €) · per piece
• Pre-punch + forming + cutting

  ZLM Liming vineyard and fence post roll forming line

  ZLM Liming offers a roll forming line for vineyard and fence posts. For trellis posts, define the position of wire slots or holes and which face is exposed. Supply the panel attachment drawing for the fence version. Agree on tooling changeover between sections and inspect trial pieces for length, straightness and hole alignment.

  ZLM (Liming)

  42 000 $ (≈ 37 530 €) · per set, delivery not included
• Forming + hydraulic cutting

  Zhongtuo roll forming line for steel privacy fence posts and rails

  This Zhongtuo configuration makes the structural profiles for steel privacy fencing. The posts locate the ends of each bay, while the rails locate and support the infill. Supply a section drawing for each profile and an assembled panel drawing to define the tooling, fixing features and cut lengths.

  Zhongtuo

  Price on request