Aktona R two-chuck fiber laser for tubes and profiles

The Aktona R uses two chucks in a horizontal layout with pneumatic support rollers. The range processes manually loaded tubes and sections with chuck options selected for the stock. A 3D head and follow-up outfeed table are available by configuration. Provide the heaviest profile drawing and finished cut lengths. Check support during rotation and unloading, and hole placement close to the end. Where weld preparation is required, request a measured bevel trial with the 3D head.

from 33 685 € (≈ 37 697 $) · net, base configuration

Manufacturer: Aktona · China

Technical specification

Standard equipment

• Transport, installation and commissioning (Poland)
• Free operator training
• 2-year warranty on the whole machine
• Pneumatic support rollers

Similar machines

• Open type

  Weni 3015G open-table fiber laser, 3000 × 1500 mm

  The Weni 3015G from the WS-G range cuts sheet metal on a single 3000 × 1500 mm open table. Direct access is useful for mixed orders with frequent sheet changes. Typical parts include brackets, panels and blanks for folding. Compare cut quality on the materials and gauges you run most often. Include loading, unloading and sheet changes in cycle estimates. Confirm the source, cutting head, extraction and assist gas setup for the configuration quoted.

  Weni Solution

  29 800 € (≈ 33 349 $) · net + delivery
• Sheet + tube

  Weni 3015GM combination sheet and tube fiber laser

  The Weni 3015GM combines a 3000 × 1500 mm sheet bed with a rotary spindle for tubes and profiles. In frame production, it can cut both flat mounting plates and holes or contours in hollow sections. List your longest profile, its cross-section and its weight. Check how it is supported and the remnant left in the chuck. Include the time to switch from sheet to tube work when comparing the machine on a typical order.

  Weni Solution

  47 500 € (≈ 53 157 $) · net + delivery
• Tube laser

  Weni 6023TL fiber laser for tubes and profiles

  The Weni 6023TL is a TL range fiber laser for round tubes and closed sections. The machine is aimed at repeat cutting of holes, contours and ends before fabrication of metal assemblies. Provide the raw stock sizes and finished part lengths. Request a trial on your longest part to check support, outfeed and chuck remnant. Ask for the exact 6023TL datasheet with cutting ranges, source power and loading options.

  Weni Solution

  59 950 € (≈ 67 090 $) · net + delivery and hotel
• Sheet + tube

  Aktona TR3015LR 3 kW sheet and tube fiber laser

  The Aktona TR3015LR is a specific LR configuration with a 3 kW source, 3000 × 1500 mm sheet bed and a tube attachment for stock up to 6 m. It can cut flat brackets and features in hollow sections for the same frame. Trial your longest section with a typical feature near the end. Check programming, support and clamping when changing to tube work. Confirm the source, cutting head and software licence for open sections in the quote.

  Aktona

  39 100 € (≈ 43 757 $) · net
• Open type

  Mekotek FLO 1530 3 kW open-table fiber laser

  This Mekotek FLO 1530 configuration combines a 3 kW Raycus source with a 1500 × 3000 mm open bed. Direct sheet access is practical for mixed short runs of brackets, panels and folding blanks. Compare the offer using a real nest with pierces and long contours. Check skeleton removal and bed capacity for your heaviest sheet. Confirm the cutting head, extraction and costs for delivery and commissioning.

  Mekotek Laser

  34 000 $ (≈ 30 382 €) · net, delivery not included
• Sheet + tube

  Mekotek FLO P 1530 3 kW sheet and tube fiber laser

  The Mekotek FLO P 1530 pairs a 1500 × 3000 mm open sheet table with a tube unit. The Machory configuration uses a 3 kW Raycus source. It suits projects with both sheet mounting plates and cut features on profiles. Check clamping and support for your longest section and the clearance required to feed it. Run one sheet job and one tube job to assess changeover. Confirm installation, training and transport for the quoted configuration.

  Mekotek Laser

  59 000 $ (≈ 52 721 €) · net
• Enclosed

  Ermaksan Fibermak Thunderbird 2000 2 kW fiber laser

  An enclosed sheet-metal fiber laser with a 3,000 × 1,500 mm working area and two motorised shuttle tables. The configuration listed here pairs a 2 kW Maxphotonics Elite source with a Precitec LightCutter autofocus head. The Thunderbird 2000 fits a shop cutting mounting plates, enclosure panels and blanks for bending from 3 × 1.5 m sheets. The two tables let the operator prepare the next sheet at the external station while the machine cuts the current one inside the enclosure. Table exchange time matters when comparing output across a run of full sheets. The configuration listed on Machory uses a Beckhoff control and Metalix CAD/CAM. To compare it with another machine, send both suppliers the same nested parts file and ask for the full-sheet cycle time, including piercing and pallet exchange. Ask the supplier to itemise filtration and freight and confirm the terms for installation and operator training.

  Ermaksan

  114 000 € (≈ 127 577 $) · delivery not included
• Sheet · 2 shuttle tables

  Ermaksan Fibermak Momentum Gen-5 CNC fiber laser

  A CNC sheet-metal fiber laser with automatic shuttle tables. Ermaksan offers the Momentum Gen-5 series with 2–30 kW source options and up to 4 G acceleration, depending on configuration. The Gen-5 is worth evaluating for sheets nested with many holes and short contours. Acceleration and pierce time influence output on these jobs, so a complete test sheet gives a useful benchmark. Supply the material, thickness and nesting file and request a measured cycle time that includes the pallet exchange. Specify the table size, source power, drive package and CAD/CAM licence when requesting a configuration. If weld preparation calls for bevelled edges, ask for a quote that names the bevel head. Confirm whether the quoted package also includes the ERAI assistant.

  Ermaksan

  Price on request