Salvagnini L5 high-dynamics sheet metal fibre laser
The Salvagnini L5 is a high-dynamics sheet fibre laser. The Compass mechanism supports fast short moves of the cutting head between closely nested parts. Evaluate it with a real nest of small holes and short contours at a typical thickness. Compare part quality, full-sheet time and outfeed handling. Confirm the laser source and automation equipment included in the build.
Price on request
Manufacturer: Salvagnini · Italy
Technical specification
| Working range XY (L5-30) | 3048 × 1524 mm |
|---|---|
| Working range XY (L5-40) | 4064 × 1524 mm |
| Z-axis stroke | 100 mm |
| Max. XY speed | 156 m/min |
| Acceleration | up to 5g (short moves) |
| Positioning accuracy Pa (VDI 3441) | 0.08 mm |
| Average position range Ps | 0.03 mm |
| Fiber sources | 3, 4, 6, 8 (E5 high-efficiency), 8, 10 kW |
| Steel, 10 kW | 25 mm |
| Stainless steel, 10 kW | 30 mm |
| Aluminium, 10 kW | 30 mm |
| Copper / brass, 10 kW | 10 mm / 10 mm |
| Steel / stainless, 3 kW | 20 mm / 12 mm |
| Min. thickness | 0.5 mm |
| Max. / avg. absorbed power (10 kW) | 42 / 24 kW |
| Max. / avg. absorbed power (3 kW) | 18 / 12 kW |
Similar machines
- Open type
Weni 3015G open-table fiber laser, 3000 × 1500 mm
The Weni 3015G from the WS-G range cuts sheet metal on a single 3000 × 1500 mm open table. Direct access is useful for mixed orders with frequent sheet changes. Typical parts include brackets, panels and blanks for folding. Compare cut quality on the materials and gauges you run most often. Include loading, unloading and sheet changes in cycle estimates. Confirm the source, cutting head, extraction and assist gas setup for the configuration quoted.
Weni Solution29 800 € (≈ 33 349 $) · net + delivery - Sheet + tube
Weni 3015GM combination sheet and tube fiber laser
The Weni 3015GM combines a 3000 × 1500 mm sheet bed with a rotary spindle for tubes and profiles. In frame production, it can cut both flat mounting plates and holes or contours in hollow sections. List your longest profile, its cross-section and its weight. Check how it is supported and the remnant left in the chuck. Include the time to switch from sheet to tube work when comparing the machine on a typical order.
Weni Solution47 500 € (≈ 53 157 $) · net + delivery - Tube laser
Weni 6023TL fiber laser for tubes and profiles
The Weni 6023TL is a TL range fiber laser for round tubes and closed sections. The machine is aimed at repeat cutting of holes, contours and ends before fabrication of metal assemblies. Provide the raw stock sizes and finished part lengths. Request a trial on your longest part to check support, outfeed and chuck remnant. Ask for the exact 6023TL datasheet with cutting ranges, source power and loading options.
Weni Solution59 950 € (≈ 67 090 $) · net + delivery and hotel - Sheet + tube
Aktona TR3015LR 3 kW sheet and tube fiber laser
The Aktona TR3015LR is a specific LR configuration with a 3 kW source, 3000 × 1500 mm sheet bed and a tube attachment for stock up to 6 m. It can cut flat brackets and features in hollow sections for the same frame. Trial your longest section with a typical feature near the end. Check programming, support and clamping when changing to tube work. Confirm the source, cutting head and software licence for open sections in the quote.
Aktona39 100 € (≈ 43 757 $) · net - Open type
Mekotek FLO 1530 3 kW open-table fiber laser
This Mekotek FLO 1530 configuration combines a 3 kW Raycus source with a 1500 × 3000 mm open bed. Direct sheet access is practical for mixed short runs of brackets, panels and folding blanks. Compare the offer using a real nest with pierces and long contours. Check skeleton removal and bed capacity for your heaviest sheet. Confirm the cutting head, extraction and costs for delivery and commissioning.
Mekotek Laser34 000 $ (≈ 30 382 €) · net, delivery not included - Sheet + tube
Mekotek FLO P 1530 3 kW sheet and tube fiber laser
The Mekotek FLO P 1530 pairs a 1500 × 3000 mm open sheet table with a tube unit. The Machory configuration uses a 3 kW Raycus source. It suits projects with both sheet mounting plates and cut features on profiles. Check clamping and support for your longest section and the clearance required to feed it. Run one sheet job and one tube job to assess changeover. Confirm installation, training and transport for the quoted configuration.
Mekotek Laser59 000 $ (≈ 52 721 €) · net - Enclosed
Ermaksan Fibermak Thunderbird 2000 2 kW fiber laser
An enclosed sheet-metal fiber laser with a 3,000 × 1,500 mm working area and two motorised shuttle tables. The configuration listed here pairs a 2 kW Maxphotonics Elite source with a Precitec LightCutter autofocus head. The Thunderbird 2000 fits a shop cutting mounting plates, enclosure panels and blanks for bending from 3 × 1.5 m sheets. The two tables let the operator prepare the next sheet at the external station while the machine cuts the current one inside the enclosure. Table exchange time matters when comparing output across a run of full sheets. The configuration listed on Machory uses a Beckhoff control and Metalix CAD/CAM. To compare it with another machine, send both suppliers the same nested parts file and ask for the full-sheet cycle time, including piercing and pallet exchange. Ask the supplier to itemise filtration and freight and confirm the terms for installation and operator training.
Ermaksan114 000 € (≈ 127 577 $) · delivery not included - Sheet · 2 shuttle tables
Ermaksan Fibermak Momentum Gen-5 CNC fiber laser
A CNC sheet-metal fiber laser with automatic shuttle tables. Ermaksan offers the Momentum Gen-5 series with 2–30 kW source options and up to 4 G acceleration, depending on configuration. The Gen-5 is worth evaluating for sheets nested with many holes and short contours. Acceleration and pierce time influence output on these jobs, so a complete test sheet gives a useful benchmark. Supply the material, thickness and nesting file and request a measured cycle time that includes the pallet exchange. Specify the table size, source power, drive package and CAD/CAM licence when requesting a configuration. If weld preparation calls for bevelled edges, ask for a quote that names the bevel head. Confirm whether the quoted package also includes the ERAI assistant.
ErmaksanPrice on request