Nargesa PI85 Hydraulic Lock Punching Press for Metal Gates
The PI85 punches openings for a mortise lock body, cylinder and handle in hollow gate sections. Nargesa lists tooling for several square and rectangular sections, including 50 × 50 mm. The die set depends on the section and whether the wall is 1.5 or 2 mm. For a run of pedestrian gates, alignment between the lock body opening, cylinder and handle spindle governs fit-up. The drawing should also identify the tube face that receives the lock faceplate. Nargesa lists a backset range of 18–37 mm. Supply a tube sample and the actual hardware for a trial. Fit the lock, cylinder and handles to the punched section and check their movement once the assembly is complete.
Price on request
Manufacturer: Nargesa · Spain
Technical specification
| Tubes | 35 × 35 to 50 × 80 mm |
|---|---|
| Wall thickness | 1.5 · 2 mm |
| Cycle time | About 58 s |
| Distance between axes | 85 mm |
| Lock box length | Adjustable |
| Lock entrance | 18–37 mm |
| Keyhole type | Euro cylinder |
| Materials | Steel, galvanised, stainless |
| Motor | 0.75 kW |
| Operation | Hydraulic, safety pedal |
| Machine dimensions (W × D × H) | 1500 × 570 × 1470 mm |
| Weight | 200 kg |
| Customs tariff code (HS) | 84624900 |
| Made in | Spain (Palau de Santa Eulàlia, Girona) |
Standard equipment
- Safety pedal
- Delivered fully assembled