Nargesa Motorised Backgauge for the PP200CNC Horizontal Press
This accessory positions the workpiece on the X axis of the PP200CNC horizontal press. X travel is 1210 mm. The ESA S625 controls the programmed positions, while the transverse Z position is set manually. It is useful when successive bends need different distances from the part edge, such as a bracket with two legs. The programme moves the stop for each operation. The fingers must contact a usable face and clear the part as it takes shape. Request a demonstration with your tooling and blank. Check access to the locating face, stop positions at each step and the finished flange dimensions after bending.
Price on request
Manufacturer: Nargesa · Spain
Technical specification
| X stroke | 1210 mm |
|---|---|
| Accuracy / repeatability | ±0.02 mm |
| Speed | 1000 mm/s |
| Z stroke (manual) | 300 mm |
| Drive | ESA servo motor 0.9 Nm, 0.52 kW, linear guides |
| Control | From the ESA S625 of the PP200CNC |
| Power supply | 480/400/220 V three-phase or 220 V single-phase |
| Max. structural load | 2000 kg |
| Fingers included | 2 – flat and needle |
| Table slats | Hardox 400 |
| Machine dimensions (W × D × H) | 1496 × 1041 × 426 mm |
| Weight | 115 kg |
| Customs tariff code (HS) | 84669400 |
| Made in | Spain (Palau de Santa Eulàlia, Girona) |
Standard equipment
- Two fingers – flat and needle
- 4 eyebolts for lifting and fitting
Similar machines
- Horizontal press · 20 t · CNC
Nargesa PP200CNC 20 t Horizontal Hydraulic Bending Press
The PP200CNC is a 20 t horizontal hydraulic press. Its standard package includes a four-V bending die. Operation-specific tools extend the press to tube-end forming, notching and punching. For a bracket with inward-facing ends, check whether the final bend is accessible. The punch and die must provide clearance for the legs that have already been formed and allow the completed part to be removed. Provide the flat pattern and finished drawing. Ask for a trial of the full sequence, including the last bend. Check which tools and positioning accessories the supplier includes in the quote.
NargesaPrice on request - Software · bending simulation
Nargesa PP200CNC Sheet Metal Bending Simulation Software
Nargesa's simulator is a Windows application for preparing programmes for the PP200CNC horizontal press. It supports numerical and graphical programming and checks the bend sequence, flat pattern and possible collisions. Nargesa specifies a perpetual licence. For a part with several bends, the programme can be prepared at a separate computer. Use the actual tool and part geometry to assess clearance for formed legs and the backgauge on the final operation. Evaluate it with a drawing of your own bracket. Compare the proposed sequence with the available tooling, transfer the programme using the supported workflow and measure the trial part.
NargesaPrice on request