Roll forming lines for lamella fences
Lines that pull sheet from the coil through roller stations, form the lamella or picket and cut it to length.
- Forming + double-line cutting
JCX-fence1 roll forming line for metal fence pickets
The JCX-fence1 roll forms metal pickets for repeat production of Dura-style fencing. Supply the cross-section, strip thickness and coil finish to define the tooling. Specify the end finish and how each picket attaches to the rail. During an acceptance run, compare the first and last pieces for length consistency and twist.
JCX (Golden Integrity)14 000 $ (≈ 12 510 €) · per set - Forming + hydraulic cutting
JCX-Rfence roll forming machine for privacy fence slats
The JCX-Rfence roll forms slats for privacy fencing. The edge folds determine how the slats overlap and engage with the side channel. Provide a panel assembly drawing with installed cover width, strip thickness and slat lengths. Ask for a trial using your prepainted material to inspect the coating after forming and check the end fit.
JCX (Golden Integrity)10 000 $ (≈ 8 936 €) · per set - Two profiles · forming + cutting
JCX-808-1559-SCZLB double-row roll former for metal fence pickets
The JCX-808-1559-SCZLB is a double-row cold roll former for metal fence pickets. Match each tooling row and its strip feed to the intended profile drawing. Supply the coil width, steel thickness and finished picket lengths with the enquiry. Request sample pieces from each row to inspect the section, edge finish and fit with the horizontal rail.
JCX (Golden Integrity)16 910 $ (≈ 15 110 €) · per set - Forming + hydraulic shear
Xianfa XF19 roll former for colour-coated steel fence sheets
The Xianfa XF19 forms prepainted steel strip into profiled fence sheets. Define rib pitch, profile depth and effective cover width after overlap when ordering tooling. Request a trial with the coating and thickness you plan to use. Check the fit along the full seam and inspect the finish at the bends.
Xianfa15 500 $ (≈ 13 850 €) · per set - Forming + automatic cutting
Zhongtuo roll forming machine for metal fence pickets and battens
This Zhongtuo machine forms the individual metal pickets or battens that repeat across a fence panel. The longitudinal folds determine the edge appearance and how the part seats on its support. Use a sample panel or section drawing to specify face width, coated stock and the positions of any required fixing holes.
ZhongtuoPrice on request