Weni WS-CWM 5in1 handheld fiber laser welder
The Weni WS-CWM 5in1 is a liquid-cooled handheld fiber laser system. Its modes cover welding, spot tacking, weld cleaning, surface cleaning and thin-metal cutting. The range includes source powers from 1 to 3 kW, depending on configuration. For frames and thin-wall profiles, request a trial using your actual joint gap and fixtures. Assess bead appearance, distortion and filler wire requirements. Specify the chiller, wire feeder and nozzles required for the modes you intend to use.
from 9 162 € (≈ 10 253 $) · net, base configuration
Manufacturer: Weni Solution · China
Technical specification
| Model | WS-CWM 5-in-1 |
|---|---|
| Welding head | DMK FWH20-S10A (EN page) / DMK FWH20-S10C (PL page) |
| Generator | Max Photonics 1/1.5/2/3 kW |
| Laser wavelength | 1064 nm |
| Optical fiber length | 10 m |
| Fiber core diameter | 50 µm |
| Welding speed | 0-120 mm/s |
| Operating temperature | 10-40 °C |
| Recommended welding thickness | up to 6 mm (EN page) / up to 5 mm (PL page) |
| Cooling | Built-in S&A chiller (EN page) / built-in CWFL-2000 chiller (PL page) |
| Dimensions | 490 x 845 x 620 mm |
| Weight | 140 kg |
| Gas | Nitrogen, argon or air, 0.01 m³/h |
| Power supply | 380 V, 50/60 Hz (EN page) / 400 V, 50/60 Hz (PL page) |
| Total power | 8 kW (EN page) / 10 kW (PL page) |
| Consumables | Protective lens, welding nozzles, mirror, collimating lens, focusing lens |
| Feed wire | carbon steel or stainless steel, depending on material |
| Control app | Bluetooth control app, standard |
Standard equipment
- Automatic wire feeder
- Bluetooth control app
- Schneider electrics
- Safety glasses
- Interchangeable nozzle set
- Lightweight DMK FWH20-S10C head
- CWFL-2000 chiller
- Warranty up to 5 years
Similar machines
- Single-module · water-cooled
Weni WS-EWL single-module fiber laser welder
The Weni WS-EWL is a single-module fiber laser welder with a handheld, water-cooled setup. Its control panel provides access to beam settings for work such as edge seams and joints on thin-wall metal parts. For repeat production, trial butt, fillet and lap joints at your actual thicknesses. Determine when filler wire is needed and check the finished seam against your tolerance. Confirm the welding head, source and cooling unit for the version quoted.
Weni Solutionfrom 11 000 € (≈ 12 310 $) · net, base configuration - 4 in 1 · air-cooled
Weni WS-HWM-A air-cooled 4-in-1 laser welder
The Weni WS-HWM-A is an air-cooled handheld welder in 1.5 kW V15 and 2 kW V20 versions. Alongside welding, it offers weld cleaning, cutting and spot tacking. The layout suits evaluation for stations where space for equipment is limited. Use a thin stainless sample to check seam consistency and distortion. For long seams, confirm the continuous duty rating under your shop conditions. Check how the handpiece and fiber reach around the assembled part.
Weni Solutionfrom 6 537 € (≈ 7 316 $) · net, base configuration - 4 in 1 · compact
Weni WS-T700 700 W handheld laser welder
The Weni WS-T700 is a compact 700 W handheld laser welder with air cooling. It is intended for work on thin metal parts and includes weld cleaning, cutting and an adjustable interval for spot tacking. For covers and small housings, check joint fit, tack consistency and marks on the visible face. Use your own sheet in the trial to choose the mode. Confirm the kit contents and the nozzles required for the operations you run most often.
Weni Solutionfrom 5 907 € (≈ 6 611 $) · net, base configuration - Handheld · weld, clean, cut
Mekotek FLW 1 kW handheld fiber laser welder
The Mekotek FLW 1 kW is a handheld fiber laser welder for thin-wall parts. It also offers cleaning and light cutting modes. Evaluate it for covers, signs and small assemblies where the seam is visible. Check how your actual joint gap affects the result. On cover samples, measure flatness after cooling and inspect the exposed face. Confirm wire feed, nozzles and the equipment required at the workstation.
Mekotek LaserPrice on request - Handheld · weld, clean, cut
Mekotek FLW 1.5 kW handheld fiber laser welder
The Mekotek FLW 1.5 kW handheld laser welder also offers cleaning and light cutting. For stainless enclosures and cladding, evaluate it on the fillet and lap joints used throughout a production batch. Prepare samples with two joint geometries. Compare penetration and any finishing needed on the visible seam. Check wire feeding and cooling and ask for the trial settings to be included with the quotation.
Mekotek LaserPrice on request - Handheld · weld, clean, cut
Mekotek FLW 2 kW handheld laser welding system
The Mekotek FLW 2 kW is a handheld fiber laser welding system with cleaning and light cutting modes. For batches of frames or housings with long seams, trial it on your most demanding joint. Inspect seam consistency along its full length and part geometry after cooling. Confirm cooling and duty rating for repeated cycles. Request an itemised list of nozzles and accessories for the planned operations.
Mekotek LaserPrice on request - Handheld · weld, cut, clean
Nargesa MS20 2 kW Handheld Laser Welding Machine
The MS20 is a handheld machine rated at 2 kW laser output. Nargesa lists welding, cutting and cleaning modes. Select the welding configuration for the joint and the requirement for filler wire. For a visible stainless assembly, specify the joint type, thicknesses and acceptable gap between the edges. Use the production fixture during the trial. Assess bead appearance and penetration as separate acceptance criteria. Request a welded sample and a cross-section of the weld to the drawing requirements. Check distortion after cooling and include integration with the planned laser booth in the quotation.
NargesaPrice on request - Safety booth · modular
Nargesa CSL Modular Laser Welding Safety Booth
The CSL is a modular enclosure for Class 4 laser work areas. Nargesa describes a protective window, a monitoring camera and interlocked double doors. In an MS20 installation, opening the door interrupts the laser enable signal. Size the layout around the table, workpieces and loading route. The position of the panels and doors needs to allow access for the largest part and for servicing. Nargesa provides a prior integration assessment for lasers from other manufacturers. Provide the room plan, laser model and work area dimensions for a quote. Request a booth drawing, an interlock description and the specified provisions for fume extraction.
NargesaPrice on request