Gema OptiFlex Pro B manual box-feed powder coating unit OptiFlex® Pro B
The Gema OptiFlex Pro B is a manual unit fed from the original powder box. It fits small orders that alternate among several colours during the day. In a demonstration, change between two packages you use and review cleaning access to the suction tube, injector and hose. Confirm box fit and the nozzles needed for the parts you coat most often.
Price on request
Manufacturer: Gema · Switzerland
Technical specification
| Powder feed | Directly from the original box, inclined vibrating table, fluidised suction tube |
|---|---|
| Gun | OptiSelect® Pro manual gun |
| Control | OptiStar® 4.0 with Electrostatic App |
| Output voltage | up to 110 kV (PowerBoost®) |
| Technologies | PowerClean purge from the gun, PCC and SuperCorona, DVC digital powder output |
| Injector | OptiFlow IG07 |
| Capacity | Extendable to two guns |
| Brand | Gema (Switzerland) |
Similar machines
- Mini unit · small hopper · 100 kV
COLO-668T-B portable powder coating kit for small jobs
The COLO-668T-B is a portable manual system with a small fluidising powder cup. It suits colour samples, trial parts and one-off jobs that use limited quantities of powder. Compare how often the cup will need refilling and how it is cleaned between colours. Send a representative part and the intended powder for a trial, and confirm the nozzles and accessories supplied with the gun.
COLOPrice on request - Manual unit · hopper or box feed · 100 kV
COLO-191S manual electrostatic powder coating unit
The COLO-191S is a manual electrostatic unit for shops coating a mix of part shapes. The operator can select settings for flat faces, recessed features and recoating to suit the controller and powder. Confirm the exact variant when comparing quotes, since the family is offered with several feed arrangements. Share a representative part with inside corners and ask which nozzles, hoses and gun wear parts are included.
COLOfrom 1 050 $ (≈ 938 €) · per unit, delivery not included - Manual unit · 10 lb stainless hopper
COLO-191ST-H compact powder coating unit with 10 lb hopper
The COLO-191ST-H is a compact manual system with a hopper rated by the manufacturer at 10 lb. Hopper feed fits small recurring batches in one colour. State average powder use per batch and the number of consecutive parts when comparing configurations. Confirm the fluidisation equipment, hopper cleaning access and availability of injector and gun wear parts. Check the available space around the intended workstation.
COLOPrice on request - Manual unit · box feed · 7" touch panel
COLO-200S-B touchscreen powder coating unit with box feed
The COLO-200S-B is a manual touchscreen unit that feeds from the original powder box. This configuration suits orders with several colours in one shift. Ask to see the box change and the cleaning sequence for the injector, hose and gun. Confirm that your powder packaging fits the feed arrangement and that the quoted equipment covers it. For a trial, compare coverage on a flat face and an inside corner.
COLOPrice on request - Manual unit · stainless hopper · 7" touch panel
COLO-200S-H touchscreen powder coating unit with hopper
The COLO-200S-H combines touchscreen control with a separate powder hopper. It fits repeat workpieces coated in longer single-colour runs. Size the hopper to a typical batch and confirm how it is refilled and emptied. Check the fluidisation equipment and access to the injector. For an application trial, provide the powder type, part orientation and surfaces where even coverage matters.
COLOPrice on request - Manual unit · box feed · 100 kV
Vogamakina VG1E-VN manual powder coating unit with box feed
The Vogamakina VG1E-VN is a manual unit for shops that change colours frequently. The original box sits on a vibrating platform and an injector feeds powder to the gun. A wheeled stand lets the unit move to the working position. During a trial, time the exchange of two boxes you actually use and review how the powder path is cleaned. Confirm box fit, compressed-air requirements and supplied nozzles.
Vogamakina2 600 € (≈ 2 910 $) · net, delivery not included - Manual unit · 0–100 kV · 250 g gun
Elektrosprey manual electrostatic powder coating gun set
The Elektrosprey manual set applies electrostatic powder in a spray booth. It suits jobs where the operator works around several faces and edges of each part. Describe the powder, typical batch and frequency of colour changes. Check the included gun, controller, feed equipment and nozzles. Request a trial on a recessed part and a list of replacement consumables.
ElektrospreyPrice on request - Manual unit · box feed · 7" touch · 100 kV
ROMER ProfiSpray V Manual Powder Coating Unit
The ProfiSpray V is a manual powder applicator with box feed and a 7-inch control panel. This configuration suits a shop running short batches and frequent colour changes. On a frame with recessed corners, check film build on both the open faces and the recesses. Use the production powder and hanger for the trial. Time cleaning from the last part in the old colour to the first acceptable part in the next one. Confirm which nozzles and changeover accessories are included.
ROMERPrice on request