Nargesa MP1500CNC 1500 mm 40 t Hydraulic Press Brake
The MP1500CNC hydraulic press brake has a 1500 mm bending length and 40 t of force. CNC control positions the vertical Y axis and the back gauge on the X axis. The standard package includes Promecam tooling. For enclosures, covers and brackets, flange size depends on how the blank locates against the gauge. Bend sequence determines whether a previously formed edge will clear the punch. The motorised vertical R axis for the back gauge is an option. Trial the part with the longest bend and the one with the shortest flange. Request a force calculation for the selected material and V opening, then measure the bend angle and flange dimensions on the samples.
Price on request
Manufacturer: Nargesa · Spain
Technical specification
| Bending length | 1500 mm |
|---|---|
| Force | 40 t |
| CNC control | ESA S630, Y and X axes |
| Encoder | GIVI MISURE optical, 0.005 mm |
| Back gauge | Bosch Rexroth ball screws, X by ESA servo, R and Z manual (R motorised optional) |
| Hydraulics | Atos synchronised unit, 24 V DC redundant safety valves |
| Tooling | Promecam clamping; punch PS.135.85.R08 and die M.460.R included |
| Compensation | Frame deflection, oil temperature, adaptive pressure |
| Safety | High-frequency laser sensor, side doors with electronic control |
| Machine dimensions (W × D × H) | 2110 × 1880 × 2210 mm |
| Weight | 4900 kg |
| Customs tariff code (HS) | 84622300 |
| Made in | Spain (Palau de Santa Eulàlia, Girona) |
Standard equipment
- Punch PS.135.85.R08
- Die M.460.R
- ESA S630 CNC with PC software
Similar machines
- Hydraulic · 700 kN
Weni WS-0725 70 t hydraulic press brake, 2500 mm
The Weni WS-0725 is a 70-tonne-class hydraulic press brake with a 2500 mm bending length. It is worth evaluating for brackets, channels and sheet metal panels with repeat bends. Calculate the bending force for the material, thickness and die opening. For a part with several folds, provide a drawing with radii, flange heights and tolerances. This gives the supplier the information needed to select tooling, backgauge travel and the bending setup.
Weni Solutionfrom 41 742 € (≈ 46 713 $) · net, base configuration - CNC press brake · 4 axes
Mekotek MKT 1560 60 t CNC press brake, 1500 mm
The Mekotek MKT 1560 is a hydraulic CNC press brake rated at 60 tonnes with a 1500 mm bending length. Y1, Y2, X and R control the ram and backgauge. The format fits shorter parts such as brackets, covers and mounting plates. On a multi-bend sample, check whether the backgauge reaches the required flanges and whether the tooling leaves room to remove the part. Select the die for material and radius, and confirm the tool package in the quote.
Mekotek LaserPrice on request - CNC press brake · 4 axes
Mekotek MKT 32135 135 t CNC press brake, 3200 mm
The Mekotek MKT 32135 is a 135-tonne CNC press brake with a 3200 mm bending length. Motorised crowning is useful on long parts such as enclosure sides, channels and reinforcing profiles. Request a full-length trial using stock from your production. Measure the angle at the centre and both ends, and specify the acceptable bend radius. Confirm backgauge axes, control and die for the job.
Mekotek LaserPrice on request - Press brake · 3100 mm · 160 t
Nargesa MP3160CNC 3100 mm 160 t Hydraulic Press Brake
The MP3160CNC hydraulic press brake has a 3100 mm bending length and 160 t nominal force. The CNC controls the Y1 and Y2 vertical axes and the X backgauge axis. A motorised R backgauge axis is optional. Long channels, panels and covers need a consistent angle along the bend. Ask for a suitable punch and V opening for the chosen material. Show the deepest flange and bend sequence in section so the supplier can check clearance around the tooling and frame. On a sample of representative length, measure the angle at both ends and in the middle. Check straightness and flange size against the part drawing.
NargesaPrice on request - Hydraulic CNC · 1000 kN · 2000 mm
Aktona WC41-100T20 100 t hydraulic press brake, 2000 mm
The Aktona WC41-100T20 is a hydraulic press brake rated at 100 tonnes with a 2000 mm bending length. Its Delem DA41T control sets the ram and backgauge axes. The format is suited to brackets, covers and short sheet-metal channels. The catalogue package describes a multi-V die, a two-section punch and a foot switch. For multi-bend parts, supply a drawing with radii and flange heights. Check the die opening and required bending force for your material before comparing quotes.
Aktonafrom 20 121 € (≈ 22 517 $) · net, base configuration - Hydraulic CNC · 1600 kN · 3200 mm · 4 axes
Aktona WC58-160T32 160 t CNC press brake, 3200 mm
The Aktona WC58-160T32 is a 160-tonne CNC press brake with a 3200 mm bending length. The DA58T controller operates X, Y1, Y2 and R. Crowning compensation is relevant when bending long panels and formed beams. For comparison, request a full-length bend on your part. Measure the angle at both ends and at the centre, and check backgauge access on narrow flanges. Confirm which multi-V die, supports and punch are included in the quotation.
Aktonafrom 38 207 € (≈ 42 757 $) · net, base configuration