V-notching of profiles

A V-notch in the profile, which is then bent into a corner – for fence, railing and gate frames without cutting into two parts.

• 90° notching · 20–50 t

  AONA Hydraulic 90° Tube Notching Machine for Bending

  This hydraulic notcher prepares a tube or profile for folding into a 90° corner. AONA describes tooling for different sections, including square and rectangular tubing. The die must match the section size and wall thickness. For frames made in smaller runs, start with the finished corner and overall dimensions. The supplier needs the bend location and the permissible gap when the notch closes. Those details determine whether a proposed die suits the part. Send the section drawing and the finished corner drawing together. On the trial part, inspect the tube around the notch and measure the angle after folding. Confirm tooling separately for each required section.

  Aona Machinery

  Price on request
• 90° V-notching · 6 dies

  AONA Hydraulic V-Notching Machine with 6 Dies

  This semi-automatic hydraulic machine cuts V-notches for folding 90° corners in gate and railing frames. The Machory package lists six dies for 20 × 20, 30 × 30, 40 × 40, 50 × 50, 60 × 40 and 60 × 60 mm tube with a 1.5–2 mm wall. On a frame folded from one length of tube, the notch positions determine the finished side lengths. For a 60 × 40 mm rectangular section, identify the face that must be visible after folding and show that orientation on the tooling drawing. Assess the test piece after folding. Check the finished angle, edge alignment and frame dimensions. For repeat production, request several consecutive parts positioned using the length stop.

  Aona Machinery

  12 350 $ (≈ 11 036 €) · delivery not included