Elektrosprey
Turkish maker of powder coating ovens, booths, manual units, tunnel plants and dip pretreatment lines, with clear engineering explanations and CE / ATEX booths.
About the company
Elektrosprey, based in Çekmeköy, Istanbul, designs and manufactures equipment for electrostatic powder and wet coating and states more than 25 years of experience, more than 300 completed projects and exports to more than 40 countries. Its quality management is certified to ISO 9001 and its products carry CE marking; the filtered electrostatic powder booths are CE and ATEX certified, and the water-curtain wet paint booths ATEX Zone 2.
The range covers electric box ovens of 3–150 kW, gas overhead-pallet ovens of 50,000–500,000 kcal/h built to TS EN 1020, cartridge booths for 2–12 guns, manual electrostatic units, complete tunnel and U-type plants with 3–7 pretreatment stages – including lines for aluminium profiles – dip pretreatment and washing lines and water-curtain wet paint booths.
Elektrosprey handles projects from the needs analysis to assembly and commissioning, trains the customer's staff during commissioning and supports installation, maintenance and breakdowns after the sale. It keeps an extensive stock of spare parts and gives a two-year manufacturer warranty.
Product range
- Electric box ovens
- Gas pallet and tunnel ovens
- Cartridge booths
- Manual units
- Tunnel and U-type plants
- Lines for aluminium profiles
- Dip pretreatment lines
- Water-curtain wet paint booths
Service and support
Installation, Training, Service visits, Spare parts stock · 2-year manufacturer warranty
- Batch oven · electric 3–150 kW · made to size
Elektrosprey electric box-type powder curing oven
The Elektrosprey electric box oven cures powder in batches. Select working volume around parts, carriers and the spacing within a load. Specify the largest batch, loading arrangement and available electrical supply. Ask for temperature distribution data with a loaded chamber and check manoeuvring room in front of the door.
ElektrospreyPrice on request - Continuous oven · natural gas / LPG · 50 000–500 000 kcal/h
Elektrosprey gas powder curing oven with overhead pallet transport
The Elektrosprey gas oven carries parts on pallets through the curing zone. It suits workpieces processed on fixtures with defined support points. Specify loaded pallet dimensions, maximum mass and feed direction. Review the loading area, fixture contact with the coated part and the quoted gas connection requirements.
ElektrospreyPrice on request - Cartridge booth · 2–12 guns · CE / ATEX
Elektrosprey electrostatic powder coating booth with cartridge filters
The Elektrosprey powder booth uses filter cartridges to collect overspray. Select the build around the clear opening and the way parts are hung and turned. State operator count and the colours used in a typical shift. Check cartridge cleaning, collected powder handling and the space needed for maintenance.
ElektrospreyPrice on request - Manual unit · 0–100 kV · 250 g gun
Elektrosprey manual electrostatic powder coating gun set
The Elektrosprey manual set applies electrostatic powder in a spray booth. It suits jobs where the operator works around several faces and edges of each part. Describe the powder, typical batch and frequency of colour changes. Check the included gun, controller, feed equipment and nozzles. Request a trial on a recessed part and a list of replacement consumables.
ElektrospreyPrice on request - Automatic line · 1–6 m/min · 500–5000 parts/h
Elektrosprey tunnel-type electrostatic powder coating line
The Elektrosprey tunnel line moves workpieces through consecutive stations on a conveyor. Throughput depends on speed, hanger pitch and the time required in each zone. State the substrates, part masses and target pieces per shift. Check pretreatment stages, booth scope and heated oven length against the heaviest product in the mix.
ElektrospreyPrice on request - Pretreatment · 5–9 dip stages
Elektrosprey dip-type metal surface pretreatment line
The Elektrosprey dip line prepares metal surfaces through a sequence of baths before coating. Select the stages around the substrate, incoming contamination and coating requirements. Provide the largest loaded carrier and batches per shift for sizing. Check tank dimensions, transfer, drainage between stages and the site water and effluent connections.
ElektrospreyPrice on request - Vertical U-type line for long aluminium profiles
Elektrosprey U-type powder coating line for aluminium profiles
The Elektrosprey U-type line coats aluminium profiles on a route that returns towards the handling area. Size the layout around suspended profile length and separation between carriers on curves. Provide the building layout, maximum part envelope and throughput target. Check loading and unloading positions and the quoted booth, oven and powder feed scope.
ElektrospreyPrice on request