AONA Pipe Hole Punching and Collar Forming Machine

This machine forms a raised collar around an opening in the pipe wall. The collar provides a mating surface for a branch in parts such as duct sections or tubular assemblies. The finished geometry depends on the opening diameter as well as the height and shape of the collar. Provide drawings of the main tube and the mating part so the supplier can match the tooling to the section, wall and material. Measure the inside diameter, height and uniformity of the formed collar. Test the branch fit around the full opening and ask for a sectioned sample if the remaining wall thickness in the formed area is critical.

Price on request

Manufacturer: Aona Machinery · China

Technical specification

Standard equipment

• 2-year warranty – parts sent free by DHL
• 24-hour online support, operation videos
• Voltage to your country

Similar machines

• CNC punching + cutting · 10–80 t

  AONA CNC Tube Punching and Cut-to-Length Line

  This line combines servo feeding, programmed hole punching and cut-off. AONA offers configurations for round and square tubes and other sections with compatible tooling. For mounting members and frame components, the distance from the cut end to the first hole often determines fit-up. Each part family needs a defined die, reference face and starting position. Stored programmes help a shop return to a previous run after a changeover. Submit two representative drawings with different lengths and hole pitches. Request sample parts after the tool change and check the first and last parts of a run against the same drawing tolerance.

  Aona Machinery

  Price on request
• CNC punching · several tubes at once

  AONA Fully Automatic CNC Tube Punching Machine

  This automated line produces repeated hole patterns in metal tubes. The CNC sets positions along the stock. AONA offers feeding and punching equipment tailored to the production brief. In a long run, throughput depends on how stock enters the machine and how finished parts are collected. Machory shows a configuration that processes four tubes in parallel. The fixture and the number of positions need to match the actual section and hole pitch. Describe how stock is supplied, how many part types run in a shift and how punched parts are collected. Compare accepted tubes per complete cycle with loading included.

  Aona Machinery

  Price on request
• CNC punching · 70–120 strokes/min

  AONA CNC Tube Punching Machine with Programmable Pitch

  Servo feeding positions the tube for regularly or irregularly spaced holes. AONA describes CNC punching for round, square and rectangular sections with dies matched to the part. Consider this configuration when different products start from pre-cut blanks. Two mounting supports can use the same tube section with different hole counts and distances from the end. Stored programmes retain the layouts, while the die determines the hole shape. Run two hole patterns on the same stock during a trial. Measure the first and last hole positions, check repeatability after switching programmes and inspect the tube wall around each opening.

  Aona Machinery

  Price on request
• CNC punching · PVC and metal tubes

  AONA CNC PVC Pipe Punching Machine

  The PVC version uses CNC control to position holes and set their count. The die and pipe support need to match the plastic grade, outside diameter and wall thickness. On perforated pipes for air or water distribution, regular pitch is only one requirement. Edge quality and preservation of the pipe shape matter as well. Use the same PVC grade intended for production when comparing tooling and clamping proposals. Send a stock sample with the hole layout. Check hole diameter, pitch and pipe ovality on the trial piece. Inspect around the openings for visible stress whitening or cracks.

  Aona Machinery

  Price on request
• CNC punching · round tubes

  AONA CNC Round Tube Punching Machine with Rotary Positioning

  This CNC machine is configured for round tubes. For parts with holes at different angular positions, a rotary fixture can combine axial feed and rotation in one programme. A typical part has two opposing holes and a third at another point around the circumference. Define the angular datum, the axial position and the alignment required between opposite holes. The clamp and support need to suit the outside diameter and wall thickness. Request a sample covering every position on the drawing. Check the angular spacing and inspect the tube for ovality around the punched openings.

  Aona Machinery

  Price on request
• Hydraulic punching · flatten, punch, cut

  AONA Hydraulic Tube Punching and End Flattening Machine

  This hydraulic machine punches tubes using interchangeable tooling. Machory shows an end-processing configuration that can flatten, punch and cut on one machine. A representative part is a tubular brace with a flattened mounting tab. Fit depends on the tab width, the hole centre and the orientation of the flattened section. Include the transition from the tube to the flat tab on the drawing so the tooling proposal reflects the finished part. Request a trial part that includes every required operation. Check fit-up and confirm which tools for flattening, punching and cut-off are supplied with the machine.

  Aona Machinery

  Price on request
• CNC angle line · 10–100 t

  AONA CNC Steel Angle Punching and Cutting Line

  The line feeds and clamps steel angle, punches a programmed pattern and cuts the part to length. The programme defines the pitch, number of positions and feed for each part. Angle brackets and supports can have holes on one or both legs. Mark the datum edge, orientation and first hole from the end. AONA describes a back-pull option for holes close to the end, so identify that feature when comparing setups. Trial the shortest part and the part with the smallest hole-to-end clearance. Measure the hole positions on both legs and verify the overall length after cut-off.

  Aona Machinery

  Price on request
• CNC punching + cutting · ±0.05 mm

  AONA 4-Cylinder CNC Tube Punching and Cutting Machine

  This line uses four hydraulic cylinders. Two perform punching and two handle cut-off. A servo feed positions the stock for the programmed sequence of operations. The cylinder count describes how the work is divided. The quoted fixtures and dies determine how many tubes run together, which hole shapes can be made and how close an operation can be to the cut end. Those details make it possible to compare competing configurations for the same part. Provide a drawing with the full hole pattern, part length and tolerances. Ask for the operation sequence and a measured cycle from feeding through to the finished cut piece.

  Aona Machinery

  Price on request