Weni AC-20HP-500 screw compressor, 16 bar and 500 L

Weni AC-20HP-500 screw compressor, 16 bar and 500 L

The Weni AC-20HP-500 combines a 15 kW screw compressor with a horizontal 500 L receiver and a maximum pressure of 16 bar. It can supply shop equipment, including compatible lasers that use compressed air as an assist gas. Match free air delivery at operating pressure to demand from the laser and other connected equipment. Specify the dryer and filters for the air quality required at the laser inlet. The receiver buffers demand peaks, while compressor output determines how much air is available continuously.

from 7 482 € (≈ 8 373 $) · net, base configuration

Manufacturer: Weni Solution · China

Technical specification

ModelAC-20HP-500
Specification F.A.D1.3 m³/min (46 cfm)
Maximum pressure16 bar (232 psi)
Engine power15 kW (20 KM)
Voltage/phase/frequency380 V / 3 phase / 50 Hz
Cooling methodAir cooling
Control methodVSD control screw
Dimensions (L x W x H)1950 x 950 x 1700 mm
Weight690 kg
Air outlet sizeG3/4
Noise level68 ± 2 dB(A)
Purification filters4 pcs / 4 filtration classes
Dust/dirt≤ 0.01 μm
Oil≤ 0.001 ppm
Dehumidifier typePlate heat exchanger
Condensation temperature3-10 °C
Air tank typeHorizontal tank
StandardCE certificate
Capacity500 liters

Standard equipment

Similar machines