AONA Hydraulic Fence Picket Spear Tip Forming Machine
This hydraulic machine forms a spear-shaped end on hollow fence pickets. The listed setup is for 20 × 20 mm tube with a 1.5–2 mm wall and uses a separate hydraulic cylinder for cutting stock to length. Tip symmetry and finished height are visible across an entire fence panel. Provide the desired outline and formed dimensions so the supplier can match the die to the picket. A manual stop sets the blank length, so the sample run should include both cut-off and forming. Check several pickets for overall length, tip shape and edge condition before comparing offers. Confirm which tube sections are covered by the separate cut-off tool.
7 300 $ (≈ 6 523 €) · delivery not included
Manufacturer: Aona Machinery · China
Technical specification
| Arrow punching | 20 × 20 mm tube, 1.5–2 mm |
|---|---|
| Cutting | 10 × 10 – 100 × 100 mm, 1.5–2 mm |
| Motor | 7.5 kW |
| Cylinder | Ø180 mm |
| Length stop | Manual |
| Frame / table | 5 mm steel body, 30 mm worktable |
| Electrics | Siemens |
| Control | Buttons + pedal |
| Power supply | 380 V, 3-phase, 50 Hz (or to order) |
| Dimensions | 1600 × 1200 × 1700 mm |
| Weight | 800 kg |
| Made in | Dongying, Shandong, China |
Standard equipment
- 2-year warranty – parts sent free by DHL
- 24-hour online support, operation videos
- Voltage to your country
Similar machines
- Hot forging of bar ends
Nargesa NF70 Hot Forging Machine for Bar Ends
The NF70 shapes heated bar ends using dies for flat, spear and textured tips. Nargesa lists up to 20 mm for round or square mild-steel bar in its main capacity table. For a batch of fence picket tips, specify the outline, width, thickness and length of the formed zone. The die determines how the tip transitions into the main bar. Show how the picket will join the surrounding panel members. Review several cooled samples. Compare tip symmetry, overall picket height and the transition around the visible part of the pattern.
NargesaPrice on request - Hot forging of scroll ends
Nargesa PC16 Hot Forging Machine for Scroll Ends
The PC16 rolls a snail-shaped end on heated steel. These ends are used in ornamental gate, grille and furniture components. The catalogue lists up to 20 mm for round or square bar and 50 × 10 mm for flat bar. For the rolled end to fit the ornament, specify its outside size, opening and direction relative to the rest of the bar. Show the starting blank and the transition into the curl on the drawing. Place the sample end on the drawing of the complete ornament. Check clearance to the adjacent element and compare the curl across a small batch.
NargesaPrice on request