Vogamakina automatic tunnel line for surface pretreatment
The Vogamakina automatic pretreatment tunnel prepares suspended parts before coating. Separate zones are sized around the material and process, such as washing, degreasing and rinsing. For continuous production, zone length and conveyor speed are designed together. Provide the maximum part envelope, substrates, target throughput and site conditions for water and effluent handling. Check which tanks, pumps and controls the quotation includes.
Price on request
Manufacturer: Vogamakina · Turkey
Technical specification
| Type | Spray tunnel for conveyor lines |
|---|---|
| Stages | According to material and required corrosion class |
| Each active section | Own chemical tank, circulation pump system and spray zone |
| Processes | Degreasing and a thin protective surface layer; different chemistry for ferrous, aluminium and alloy parts |
| Design inputs | Raw material, surface oil content, indoor or outdoor use, expected warranty period |
| After the tunnel | Drying oven |
| Brand | Vogamakina (Türkiye) |
Similar machines
- Manual set · booth S-1115 + 6.5 kW oven + gun
COLO powder coating starter set with booth, oven and gun
The COLO starter set brings together a spray booth, a powder gun and a curing oven for manual small-batch work. It fits a shop finishing brackets, plates or compact housings. Measure the largest part on its fixture and check that it passes through both the booth opening and the oven door. Ask for the three model codes, the electrical connection requirements and the supplied powder-feed equipment to compare package quotations.
COLO6 430 $ (≈ 5 746 €) · per set, delivery not included - Manual line · 7 m booth + 7 m gas oven
COLO manual powder coating line for fence panels
This manual COLO line is configured for fence panels, gates and similar long fabrications. Hanging slatted or tubular panels should leave both faces and welded joints accessible. Base oven length and booth approach on the longest panel together with its carrier. Include panels per batch, entrance dimensions and the planned turning or transfer arrangement in the enquiry so the proposed layout matches the workpieces.
COLOPrice on request - Manual line · booth + 5 m gas / diesel oven
COLO manual batch powder coating line for steel frames
This COLO manual line arranges application and curing around batches of fabricated steel frames. It fits a shop handling several frame sizes and changing order quantities. Determine how many frames a carrier can hold while leaving the inside corners accessible. Allow a staging area between the booth and oven, and confirm the batch loading arrangement and any pretreatment equipment included in the quotation.
COLOPrice on request - Manual line · walk-in booth + gas oven · top track
COLO manual powder coating line with overhead track
This manual COLO line moves suspended parts along an overhead track between workstations. It suits frames and welded assemblies that are coated and cured in a hanging position. Provide the combined mass of each part and carrier and the required clearance below the track. Check the oven transfer, staging locations and how carriers accumulate or pass one another in the proposed layout.
COLOPrice on request - Automatic cyclone booth + reciprocator + batch oven
COLO semi-automatic powder coating line for steel plates
The COLO semi-automatic steel plate line combines automatic application with a manually loaded batch oven. Consistent plate geometry makes it possible to plan the gun positions around a recurring workpiece envelope. Decide how edges will be covered and how operators will move coated plates to curing. Provide maximum size and weight, the required face coverage and expected plates per shift to size the line.
COLOPrice on request - Powder feed · ultrasonic sieve · PLC
Vogamakina VM powder centre for automatic coating lines
The Vogamakina VM powder centre manages supply to the guns on an automatic line. In a configured recovery system, transfer equipment brings fresh powder and cyclone reclaim into the feed. Match this station to the booth, sieve and control system. Specify how many guns run at once, how the powder mix is monitored and what is cleaned between colours. Check the supplied pumps, hoses and interfaces against the line layout.
VogamakinaPrice on request - Gun mover · 7" touch · 10 programs
Vogamakina VM vertical reciprocator for automatic powder guns
The Vogamakina VM vertical reciprocator moves automatic powder guns up and down as parts travel through the booth. Stroke and speed are set around part height and line operation. Provide the gun count, total mounting load and useful stroke for sizing. Check hose routing, maintenance access and how the gun motion is coordinated with the conveyor speed in the planned line.
VogamakinaPrice on request - Pretreatment · 2–3 stages · AISI 304
Vogamakina manual spray cabinet for chemical pretreatment
The Vogamakina manual cabinet gives operators a spray station for preparing metal parts before coating. The manufacturer describes an AISI 304 stainless build and two- or three-stage configurations according to the process. Supply the largest part dimensions, substrate, incoming surface condition and rinse requirements. Check how process liquids are collected, how all faces are reached and which utility connections the installation needs.
VogamakinaPrice on request