DREISTERN roll forming system for rack beams and box beams
DREISTERN applies two-stage roll forming to storage rack beams and closed box sections. Specify the finished beam geometry, size range and seam requirements for the closed profiles. Check the formed section with its end connectors and review how tooling is changed between the profiles you plan to manufacture.
Price on request
Manufacturer: DREISTERN · Germany
Technical specification
| Strip – box beams | up to 400 × 2.0 mm (catalogue) |
|---|---|
| Speed | up to 80 m/min (double box profiles, flying cut-off) |
| Height change | at the touch of a button, no roll change |
| Manual changes | coil and cut-off tool (automation available) |
| Chained line | automatic profile nesting and welding of hooking lugs, Start-Stop system |
| Options | modular chained systems, automatic nesting and stacking, welding systems for head parts, flying cut-off or Start-Stop with stationary cut-off |
| Manufacturer | DREISTERN GmbH & Co. KG, Schopfheim, Germany |
Standard equipment
- Double roll forming machine
- Cut-off tool for the beam profile
- Laid out for the customer's profiles
Similar machines
- Box beam line · 1.5–3 mm · 10–20 m/min
Linbay interlocking box beam roll forming line
The Linbay line produces box beams for pallet racks. In the interlocking build, the two formed sections must close consistently along the length. Provide the beam and end-connector drawings together with steel thickness. At acceptance, inspect the seam, straightness and cut accuracy on the longest beam you intend to make.
LinbayPrice on request - Step beam line · 1.5–2 mm · flying saw
Linbay step beam roll forming line with flying saw
The Linbay line roll forms stepped rack beams with a ledge for the decking or panel. A travelling saw follows the moving section during the cut, allowing continuous feed. Supply the ledge dimensions, steel thickness and length range for the trial. Check cut finish and how the decking seats on the finished beam.
LinbayPrice on request - Box beam line · 1.0–3.0 mm
YingYee heavy-duty rack box beam roll forming line
YingYee's line produces closed box-section beams for storage racks. Define the section, material and joining method for the formed parts. Confirm which closing, cut-off and discharge stations are included in the quotation. Inspect a sample for dimensional fit and seam closure with the specified end connectors.
YingYee MachineryPrice on request