Linbay interlocking box beam roll forming line

The Linbay line produces box beams for pallet racks. In the interlocking build, the two formed sections must close consistently along the length. Provide the beam and end-connector drawings together with steel thickness. At acceptance, inspect the seam, straightness and cut accuracy on the longest beam you intend to make.

Price on request

Manufacturer: Linbay · China

Technical specification

Standard equipment

• Manual decoiler
• Roll former with Torri stands, chain drive
• GCr15 rollers
• Hydraulic cut-off
• Siemens PLC, Yaskawa inverter

Similar machines

• Beam line · up to 80 m/min (double box profiles)

  DREISTERN roll forming system for rack beams and box beams

  DREISTERN applies two-stage roll forming to storage rack beams and closed box sections. Specify the finished beam geometry, size range and seam requirements for the closed profiles. Check the formed section with its end connectors and review how tooling is changed between the profiles you plan to manufacture.

  DREISTERN

  Price on request
• Step beam line · 1.5–2 mm · flying saw

  Linbay step beam roll forming line with flying saw

  The Linbay line roll forms stepped rack beams with a ledge for the decking or panel. A travelling saw follows the moving section during the cut, allowing continuous feed. Supply the ledge dimensions, steel thickness and length range for the trial. Check cut finish and how the decking seats on the finished beam.

  Linbay

  Price on request
• Box beam line · 1.0–3.0 mm

  YingYee heavy-duty rack box beam roll forming line

  YingYee's line produces closed box-section beams for storage racks. Define the section, material and joining method for the formed parts. Confirm which closing, cut-off and discharge stations are included in the quotation. Inspect a sample for dimensional fit and seam closure with the specified end connectors.

  YingYee Machinery

  Price on request