AONA Two-Station Pallet Racking Beam Welding Machine
Two stations separate handling from welding. While one station welds the beam and its end connectors, the other can be unloaded and prepared for the next part. The arrangement is relevant to regular batches with a steady supply of prepared beams and connectors. Output depends on positioning time, torch time and the station transfer. For mixed lengths, confirm how each fixture is adjusted. Request a timed trial with the stations alternating. Count completed beams over a representative run and check the loading and unloading arrangement at your beam length and weight.
Price on request
Manufacturer: Aona Machinery · China
Technical specification
| Beam length | 500–4000 mm or to order |
|---|---|
| Welding sides | 4 or 6 (to order) |
| Cycle | ≈ 15 s per beam |
| Welding units | 4 or 6 × TC-315F IGBT (Chinese brand) |
| Connector thickness | 0.5–5 mm |
| Welding wire | 0.8–1.0 mm |
| Drives | 2 × 2 kW stepping motors |
| Clamping | Pneumatic |
| Load | 1000 kg per fixture, 2000 kg in total |
| Voltage | 220 / 380 / 415 V, 3-phase (to order) |
| Size | ≈ 5.2 × 1 × 1.9 m |
| Weight | 2600 kg |
| Made in | Dongying, Shandong, China |
Standard equipment
- 2-year warranty – parts sent free by DHL
- 24-hour online support, operation videos
- Voltage to your country
Similar machines
- Shelf beam welding · 4 torches
AONA Automatic Shelf Rack Beam Welding Machine
This machine locates a shelf beam and its end brackets in a fixture for automatic welding. AONA describes pneumatic clamping, length adjustment and configurations with torches working at both ends together. In a batch of shelf beams, bracket geometry affects how each beam fits the uprights. Submit the beam and bracket drawings with the required weld locations so the supplier can match the fixture to the assembly. Inspect the trial beam after it cools. Check bracket spacing and parallelism, then verify fit on the actual rack uprights.
Aona MachineryPrice on request - Rack beam welding · 6 sides
AONA Six-Side Rack Beam Welding Machine
The six-side configuration serves rack beams with end connectors requiring welds on several faces. AONA describes pneumatic clamping and a turnover mechanism to provide torch access around the beam geometry. The weld layout drives the configuration. Send drawings of both ends with the faces, seam lengths and positions marked. Show restricted areas around the connector in section so the supplier can assess torch access. On the trial beam, verify that all specified seam locations are covered and check dimensions after cooling. Compare the time for the full sequence with turnover included.
Aona MachineryPrice on request