Powder coating shop
Machines for an own powder coating shop: cleaning and pretreatment, booths, gun units, curing ovens on electricity or gas, and complete lines. Choose a batch shop or a conveyor line – the route shows every operation, real machines from China, Türkiye, Poland, Germany and Switzerland and what to check before you buy.
Batch shop: booth + box oven
Parts are hung on a trolley or a top track, coated by hand in a booth and cured in a batch oven – the usual start for fences, gates and railings.
- Cleaning and pretreatment – Required
- Powder application – Required
- Curing – Required
- Film thickness and adhesion check – External service
Conveyor line
Parts travel on a conveyor through pretreatment, drying, booth and curing oven – for series production with many parts a day.
- Tunnel or dip pretreatment – Required
- Drying after washing – Required
- Automatic application – Required
- Tunnel curing – Required
- Conveyor – Required
Complete lines and pretreatment
Manual and automatic powder coating lines, washing and phosphating before coating, cyclones, powder centres and reciprocators.
- Manual set · booth S-1115 + 6.5 kW oven + gun
COLO powder coating starter set with booth, oven and gun
The COLO starter set brings together a spray booth, a powder gun and a curing oven for manual small-batch work. It fits a shop finishing brackets, plates or compact housings. Measure the largest part on its fixture and check that it passes through both the booth opening and the oven door. Ask for the three model codes, the electrical connection requirements and the supplied powder-feed equipment to compare package quotations.
COLO6 430 $ (≈ 5 746 €) · per set, delivery not included - Manual line · 7 m booth + 7 m gas oven
COLO manual powder coating line for fence panels
This manual COLO line is configured for fence panels, gates and similar long fabrications. Hanging slatted or tubular panels should leave both faces and welded joints accessible. Base oven length and booth approach on the longest panel together with its carrier. Include panels per batch, entrance dimensions and the planned turning or transfer arrangement in the enquiry so the proposed layout matches the workpieces.
COLOPrice on request - Manual line · booth + 5 m gas / diesel oven
COLO manual batch powder coating line for steel frames
This COLO manual line arranges application and curing around batches of fabricated steel frames. It fits a shop handling several frame sizes and changing order quantities. Determine how many frames a carrier can hold while leaving the inside corners accessible. Allow a staging area between the booth and oven, and confirm the batch loading arrangement and any pretreatment equipment included in the quotation.
COLOPrice on request - Manual line · walk-in booth + gas oven · top track
COLO manual powder coating line with overhead track
This manual COLO line moves suspended parts along an overhead track between workstations. It suits frames and welded assemblies that are coated and cured in a hanging position. Provide the combined mass of each part and carrier and the required clearance below the track. Check the oven transfer, staging locations and how carriers accumulate or pass one another in the proposed layout.
COLOPrice on request - Automatic cyclone booth + reciprocator + batch oven
COLO semi-automatic powder coating line for steel plates
The COLO semi-automatic steel plate line combines automatic application with a manually loaded batch oven. Consistent plate geometry makes it possible to plan the gun positions around a recurring workpiece envelope. Decide how edges will be covered and how operators will move coated plates to curing. Provide maximum size and weight, the required face coverage and expected plates per shift to size the line.
COLOPrice on request - Powder feed · ultrasonic sieve · PLC
Vogamakina VM powder centre for automatic coating lines
The Vogamakina VM powder centre manages supply to the guns on an automatic line. In a configured recovery system, transfer equipment brings fresh powder and cyclone reclaim into the feed. Match this station to the booth, sieve and control system. Specify how many guns run at once, how the powder mix is monitored and what is cleaned between colours. Check the supplied pumps, hoses and interfaces against the line layout.
VogamakinaPrice on request - Gun mover · 7" touch · 10 programs
Vogamakina VM vertical reciprocator for automatic powder guns
The Vogamakina VM vertical reciprocator moves automatic powder guns up and down as parts travel through the booth. Stroke and speed are set around part height and line operation. Provide the gun count, total mounting load and useful stroke for sizing. Check hose routing, maintenance access and how the gun motion is coordinated with the conveyor speed in the planned line.
VogamakinaPrice on request - Pretreatment · 2–3 stages · AISI 304
Vogamakina manual spray cabinet for chemical pretreatment
The Vogamakina manual cabinet gives operators a spray station for preparing metal parts before coating. The manufacturer describes an AISI 304 stainless build and two- or three-stage configurations according to the process. Supply the largest part dimensions, substrate, incoming surface condition and rinse requirements. Check how process liquids are collected, how all faces are reached and which utility connections the installation needs.
VogamakinaPrice on request - Spray tunnel · stages to the process
Vogamakina automatic tunnel line for surface pretreatment
The Vogamakina automatic pretreatment tunnel prepares suspended parts before coating. Separate zones are sized around the material and process, such as washing, degreasing and rinsing. For continuous production, zone length and conveyor speed are designed together. Provide the maximum part envelope, substrates, target throughput and site conditions for water and effluent handling. Check which tanks, pumps and controls the quotation includes.
VogamakinaPrice on request - Automatic line · 1–6 m/min · 500–5000 parts/h
Elektrosprey tunnel-type electrostatic powder coating line
The Elektrosprey tunnel line moves workpieces through consecutive stations on a conveyor. Throughput depends on speed, hanger pitch and the time required in each zone. State the substrates, part masses and target pieces per shift. Check pretreatment stages, booth scope and heated oven length against the heaviest product in the mix.
ElektrospreyPrice on request - Pretreatment · 5–9 dip stages
Elektrosprey dip-type metal surface pretreatment line
The Elektrosprey dip line prepares metal surfaces through a sequence of baths before coating. Select the stages around the substrate, incoming contamination and coating requirements. Provide the largest loaded carrier and batches per shift for sizing. Check tank dimensions, transfer, drainage between stages and the site water and effluent connections.
ElektrospreyPrice on request - Cyclone · 10 000–20 000 m³/h
ROMER CK-D low-profile powder recovery cyclone
The ROMER CK-D range separates powder from booth extraction air where available height is limited. A stainless steel hopper, screen and vibrator collect and screen recovered material. An RP-01 connection lets the recovery circuit transfer it back to the powder feed system. For a retrofit, measure overhead clearance and match cyclone airflow and pressure drop to the extraction fan. Where powder is reused, agree on how the hopper, screen and transfer route will be cleaned between colours.
ROMERPrice on request - Turnkey line · washer, dryer, booth, gas oven, 120 m conveyor
ROMER automatic powder coating line
A ROMER automatic powder coating line combines tunnel washing, drying, powder application and curing on an overhead conveyor. In repeat production, the line gives each metal part the same sequence of process stages. Size the line from the part and hanger envelope, target hangers per hour and required surface treatment. Specify the largest frame or panel before selecting conveyor and booth dimensions. At acceptance, check pretreatment results and log the curing temperature on a representative part.
ROMERPrice on request - Pretreatment · manual pressure washing · 11 kW
ROMER MS Pressure Washing Booth for Surface Preparation
The ROMER MS is a stationary pressure washing booth for pretreatment. ROMER offers two- or three-stage arrangements that can include degreasing and phosphating according to the process. For welded frames, identify the contamination to remove and the points that can trap solution. Part position affects access to corners and how it drains after rinsing. Supply the part envelope and typical contamination. Ask for the process stages, solution return arrangement and the water quality specified for the final rinse.
ROMERPrice on request - Automatic corona gun for lines and robots
Gema OptiGun GA04 automatic powder coating gun OptiGun® GA04
The Gema OptiGun GA04 is an automatic powder gun for integration into a booth. Define the target faces, part motion and mounting position before selecting the build. Match nozzle and powder feed to the controller and the planned distance from the part. Ask for a trial on a representative workpiece to assess face, edge and recess coverage.
GemaPrice on request - Gun control unit for automatic lines
Gema OptiStar 4.0 CG20 automatic powder gun controller OptiStar® 4.0 CG20
The Gema OptiStar 4.0 CG20 controls pneumatic and electrostatic parameters for an automatic powder gun. For a retrofit, identify the gun, powder feed and how the central line control selects recipes. Check supplied cables and the cabinet interfaces. Trial two repeat products to confirm that settings can be recalled when production changes over.
GemaPrice on request - Automatic corona gun for coating lines
Wagner PEA-X1 automatic corona powder coating gun
The Wagner PEA-X1 is an automatic corona-charging gun for integration into a powder coating line. Its modular design can be configured with nozzles and accessories for the application. Specify the mount, part geometry and areas to sample. Confirm compatibility with the controller, powder feed and moving or fixed gun support. Ask for a list of nozzles and wear parts for the exact line configuration.
WagnerPrice on request - Automated powder management centre for auto lines
ROMER ProfiCenter CP02 powder feed centre
ROMER ProfiCenter CP02 manages powder feed for an automatic coating booth. Its sealed fluidised hopper takes fresh powder from a box. Depending on the selected mode, recovered powder is mixed back into the feed or routed to waste. Compressed-air cleaning and Modbus communication support integration with the line. For a retrofit, check RP-01 connections, control signals and hose access. If colour carryover is critical, use a dark-to-light changeover trial to assess the cleaning procedure.
ROMERPrice on request - Automatic closed-chamber pretreatment
ROMER Automatic Chamber Washer for Metal Pretreatment
The ROMER chamber washer treats batches using programmed degreasing, rinsing and phosphating stages for the selected process. Its PLC can set treatment times and temperatures. For a batch of brackets, hanger spacing determines whether nozzles reach the inner faces. Give the supplier a section drawing, the intended loading density and the allowed time to drying. Compare parts from the middle and ends of the trial load. Confirm the number of tanks, solution separation and how the solutions are maintained.
ROMERPrice on request - Vertical U-type line for long aluminium profiles
Elektrosprey U-type powder coating line for aluminium profiles
The Elektrosprey U-type line coats aluminium profiles on a route that returns towards the handling area. Size the layout around suspended profile length and separation between carriers on curves. Provide the building layout, maximum part envelope and throughput target. Check loading and unloading positions and the quoted booth, oven and powder feed scope.
ElektrospreyPrice on request - I-beam overhead chain conveyor for paint lines
Vogamakina Webb-type monorail conveyor for coating lines
The Vogamakina Webb-type conveyor carries suspended parts on trolleys driven by a chain along a single rail. The route can be designed with horizontal curves and changes in elevation. Provide loaded hanger mass, carrier spacing and the throughput target for sizing. Check the load rating of the specified chain and the route interfaces at the booth, oven and loading station.
VogamakinaPrice on request - Compact booth + oven set for tyre workshops
Vogamakina powder coating line for car rims
The Vogamakina wheel rim line combines manual booth application with batch curing of a complete set. In the manufacturer's example, the oven takes four 24-inch rims. Rotating hangers give access to spokes and inner rims during application. Specify rim diameter and width, sets per shift and preferred heating source. Agree on how surface preparation will be handled and which stations the quoted package covers.
VogamakinaPrice on request - Automatic gun + control for serial production
COLO-800DA automatic powder application unit
The COLO-800DA controls automatic powder application within a metal finishing line. It suits repeated runs of profiles, panels and frames that pass the guns in a consistent orientation. Map the faces to coat on each pass before integrating the unit with the booth and conveyor. Request a quote detailing gun count, powder feed, individual controls and the interface to part movement. Identify recessed areas that will receive manual touch-up.
COLOfrom 700 $ (≈ 626 €) · per piece, MOQ 1
Powder coating booths
Manual booths with cartridge filters, open spray walls, walk-in booths and automatic booths with cyclone recovery – they keep the workshop clean and return the overspray for reuse.
- Manual booth · 2 cartridges · 1.5 kW
COLO-S-1115 compact manual powder coating booth
The COLO-S-1115 is a compact manual booth for brackets, plates and small enclosures. The operator works through the front opening while the filter section collects powder carried past the workpiece. Measure the part with its hook attached and allow space to turn it when several faces need coating. Ask for the usable opening, filter type and count, and the clearance needed to replace the cartridges at the planned installation point.
COLO2 500 $ (≈ 2 234 €) · per unit, delivery not included - Manual booth · 3 cartridges · 4000 m³/h
COLO-1517 manual powder booth with cartridge recovery
The COLO-1517 collects powder through filter cartridges during manual batch coating. It suits parts that an operator can position and coat through the front opening. For single-colour runs, establish how the collected powder is removed and when it can be returned to production. Compare cartridge dimensions, the cleaning arrangement and the service clearance at the rear or side of the proposed booth.
COLOPrice on request - Open booth · 4 cartridges · pulse-jet
COLO-S-3222 open-face powder coating booth
The COLO-S-3222 gives operators a wide front approach to panels, doors and frames during manual application. Choose the part orientation around the faces that must be reached and the position of the filter bank. Tall panels also need space to manoeuvre the hanger in front of the booth. COLO shows several builds in this family. Request a drawing with the clear opening, filter arrangement and required maintenance space.
COLOPrice on request - Walk-in booth · 5 cartridges · 6600 m³/h
COLO-S-3217 walk-in powder booth for heavy parts
The COLO-S-3217 provides walk-in access for manual coating of heavy metal parts. Size the opening around the workpiece and its handling fixture, then check the load capacity along the route to the spray position. Position welded frames so their sides and joints can be reached. Supply a drawing, maximum loaded mass and intended handling method, such as a trolley or suspended carrier, with the project enquiry.
COLOPrice on request - Walk-in booth · 6 cartridges · 8000 m³/h
COLO-3924 large walk-in powder coating booth
The COLO-3924 is a large walk-in booth that gives the operator access around bulky frames, fabrications and long parts. Plan the full route from pretreatment to the curing oven. Include the trolley or hanger when measuring the entrance and leave space to work around the part. Request a layout drawing showing the usable booth envelope, the filter module and the maintenance zones.
COLOPrice on request - Automatic booth · PVC · stainless cyclone
COLO-S-PP automatic plastic powder booth with cyclone
The COLO-S-PP is a plastic booth for an automatic line that changes between colours. Cyclone separation works with the powder supply and automatic guns configured for the project. Describe the colour sequence, expected changeovers per shift and longest production run. Ask to see the wall and powder-path cleaning sequence using your powders. Confirm whether the quotation includes a powder centre, gun reciprocators and the final filtration stage.
COLOPrice on request - Manual booth · one-side open · pulse-jet
Vogamakina VFKW-3 powder coating booth with cartridge filters
The Vogamakina VFKW-3 is a cartridge filter booth for batches of metal parts. The filters collect powder drawn from the working area by the extraction air. Assess the working opening with a typical workpiece on its hanger and check access to every face to be coated. Request the exact VFKW-3 configuration, replacement cartridge size and details of the cleaning and powder collection arrangements.
Vogamakina6 100 € (≈ 6 827 $) · net, delivery not included - Cyclone + after-filter · steel or PVC
Vogamakina cyclone recovery powder coating booth
Vogamakina's modular cyclone booth uses a cyclone followed by a final filter. Powder separated by the cyclone can be sieved and returned to the feed, while finer particles reach the downstream filter. This arrangement suits lines running consecutive batches with planned powder reuse. Specify the booth opening, cyclone service access and the cleaning sequence between strongly contrasting colours when requesting a quote.
VogamakinaPrice on request - Cartridge booth · 2–12 guns · CE / ATEX
Elektrosprey electrostatic powder coating booth with cartridge filters
The Elektrosprey powder booth uses filter cartridges to collect overspray. Select the build around the clear opening and the way parts are hung and turned. State operator count and the colours used in a typical shift. Check cartridge cleaning, collected powder handling and the space needed for maintenance.
ElektrospreyPrice on request - Manual booth · 2 windows · up to 800 g/min
ROMER KPD manual powder coating booth
The ROMER KPD range is designed for manual powder coating. Versions with two working openings and a door let the operator approach a suspended part from different sides, which helps when coating frames and welded assemblies with recessed corners. Compare the opening dimensions with your part and its hanger. Check the clearance needed to rotate the workpiece and the space required to service the polyester filters. Specify extraction airflow and access layout for the selected booth.
ROMERPrice on request - Enclosed booth · from 0.69 kW · 400 g/min
ROMER KPZ enclosed powder coating booth
ROMER KPZ is an enclosed powder booth range for manual coating. On a batch line, booth size affects the space available to hang the workpiece, reach each surface with the gun and transfer the part to curing. Choose a compact or wider version based on the clear opening and loading route. The booths feature automatic filter cleaning. Include the largest part dimensions with its hooks, the handling method and the expected frequency of colour changes in an enquiry.
ROMERPrice on request - Manual booth · door · 2.2 kW
ROMER KPP Powder Coating Booth with Access Door
The KPP is a manual powder coating booth with one operator opening and an access door. The KPP-2 and KPP-3 differ in opening width and filter area, at 30 and 45 m² respectively. For frames and parts with multiple edges, consider how the operator reaches both faces. The opening governs gun access, while the door affects how the hanging fixture is loaded. Trial the booth with the intended powder and a representative part. Check airflow across the working opening and confirm how the automatic filter-cleaning cycle is configured.
ROMERfrom 4 200 € (≈ 4 700 $) · net - Open booth · up to 4 m window
ROMER KPO Open Powder Coating Booth for Panels
The KPO is an open booth with a wide operator opening. The range offers different opening widths, automatic filter cleaning and optional powder recovery. For a fence panel or gate leaf, use the dimensions in its coating position. Show the hanging height and the clearance required for turning. Check gun access to the ends and the back face of the section. Request a booth layout showing your workpiece. On a trial, assess access and powder containment across the full opening at the intended application rate.
ROMERPrice on request - Automatic booth · dielectric · cyclone · ATEX zone 22
ROMER KAP1 automatic powder coating booth
ROMER KAP1 is a dielectric booth for automatic powder application on a conveyor. Part detection works with reciprocators and ProfiSpray A guns so the spray setup can follow the workpiece geometry and how it is hung. Send the minimum and maximum part heights, hanger spacing and any recessed surfaces that need coating. These inputs help specify gun count, reciprocator travel and conveyor speed. For frequent colour changes, include powder recovery and the cleanout sequence in the quotation.
ROMERPrice on request - Manual booth · ClassicStandard / ClassicOpen · 4000–6600 Nm³/h
Gema ClassicLine manual powder coating booths
ClassicLine is Gema's family of manual powder booths for individual workpieces and batches. Select the build around the loaded hanger envelope and access to the different faces of the part. Describe the spray position, number of operators and colour-change routine in the enquiry. Check the clear opening, filter layout and service space on the installation drawing.
GemaPrice on request - Manual booth · 2 cartridges · 3 kW · CE / ATEX
Wagner BASIC 4000 manual suspension powder coating booth
The Wagner BASIC 4000 is a manual booth for individual parts and small batches. Its integrated rotating hook lets the operator reach several faces of a suspended part from the work position. Wagner lists two filter cartridges. Check the sweep of the workpiece when rotated and its mass together with the hanger. For a typical batch, compare how parts are loaded and the space required to replace the cartridges.
WagnerPrice on request - Spray wall · 3 cartridges · 6 kW · CE / ATEX
Wagner BASIC 8000 powder spray wall for larger parts
The Wagner BASIC 8000 is a powder spray wall for manually coating larger workpieces, including parts fed on a manual conveyor. The open working front leaves room to position panels or frames ahead of the filter section. Wagner lists three filter cartridges. Check how the largest part is positioned and whether the operator can reach the required areas. Confirm the conveyor interface and service space around the wall.
WagnerPrice on request - Manual booth · 3 cartridges · 2.2 kW · multi-colour
Wagner ID manual suspension booth for powder coating
The Wagner ID suspension booth is designed for small batches in different colours. A roof-mounted hook holds the part in the working area, and the stainless steel floor and smooth interior are accessible for cleaning. Measure from the hook to the lowest point of the workpiece and check how a batch is changed over. Confirm the powder collection arrangement and filter service clearance in the quotation.
WagnerPrice on request - Spray wall · 3 cartridges · 2.2 kW
Wagner ID powder spray wall for large workpieces
The Wagner ID spray wall serves larger workpieces in long single-colour runs and when shades change frequently. A stainless steel base is part of the working area. Check how panels are fed to and removed from the wall, and where the operator stands to reach their edges. Compare access to the cartridges and the cleaning sequence using the colours your shop actually alternates.
WagnerPrice on request - Compact automatic booth for frequent colour changes
Gema MagicCompact EquiFlow BA04 automatic powder booth MagicCompact® EquiFlow® BA04
MagicCompact EquiFlow BA04 is an automatic Gema booth for lines that alternate between colours. The plastic-panel enclosure and extraction arrangement are designed around cleaning between runs. Supply the part envelope, gun positions and number of colour changes per shift. Specify the powder centre in the quotation and trial the complete changeover with two contrasting powders.
GemaPrice on request - Pre-configured automatic booth for quick colour changes
Wagner QuickCube automatic powder booth for fast colour changes
The Wagner QuickCube is an automatic plastic booth for lines with frequent colour changes. Wagner offers four preconfigured sizes and modular manual positions for coating ahead of or after the automatic zone. Supply the suspended part envelope, gun count and areas requiring manual access. Check how the selected size connects to powder feed, conveyor handling and the changeover cleaning sequence.
WagnerPrice on request - Compact filter booth for small and medium shops
ROMER WP powder coating booth with cartridge filters
ROMER WP is a compact booth range for manual powder application. Cartridge filters collect overspray, Romer Jet cleans the filters and a touchscreen provides booth controls. Compare the WP-3, WP-4, WP-6 and WP-8 by booth size and filter count. To size a booth for your station, specify the widest part, the number of guns in simultaneous use and the clearance available for cartridge service.
ROMERPrice on request - Antistatic plastic booth for automatic lines
Vogamakina fast colour change plastic powder coating booth
Vogamakina designed this plastic booth for automatic coating with frequent colour changes. Antistatic panels and cleaning provisions near the booth floor are part of the manufacturer's described build. Share the number of colours, daily changeovers and longest run when sizing the system. Request a demonstration covering the booth, cyclone and powder centre as one cleaning sequence. Specify which guns, controls and recovery components the line requires.
VogamakinaPrice on request - Through-feed booth with cyclone reclaim for continuous lines
COLO through-feed powder coating booth with cyclone recovery
The COLO through-feed booth is intended for a line where suspended parts enter and leave at opposite ends. A cyclone separates powder from the extraction stream for collection and return according to the line configuration. The layout suits recurring runs of profiles, frames and panels. Specify the largest loaded hanger, carrier pitch and conveyor speed when sizing the booth. Agree on how recovered powder is handled when a different colour enters production.
COLO20 000 $ (≈ 17 872 €) · for 1 piece
Powder guns and units
Manual electrostatic units with box feed, hopper or mini cup – from budget Chinese sets to Swiss and German reference units.
- Mini unit · small hopper · 100 kV
COLO-668T-B portable powder coating kit for small jobs
The COLO-668T-B is a portable manual system with a small fluidising powder cup. It suits colour samples, trial parts and one-off jobs that use limited quantities of powder. Compare how often the cup will need refilling and how it is cleaned between colours. Send a representative part and the intended powder for a trial, and confirm the nozzles and accessories supplied with the gun.
COLOPrice on request - Manual unit · hopper or box feed · 100 kV
COLO-191S manual electrostatic powder coating unit
The COLO-191S is a manual electrostatic unit for shops coating a mix of part shapes. The operator can select settings for flat faces, recessed features and recoating to suit the controller and powder. Confirm the exact variant when comparing quotes, since the family is offered with several feed arrangements. Share a representative part with inside corners and ask which nozzles, hoses and gun wear parts are included.
COLOfrom 1 050 $ (≈ 938 €) · per unit, delivery not included - Manual unit · 10 lb stainless hopper
COLO-191ST-H compact powder coating unit with 10 lb hopper
The COLO-191ST-H is a compact manual system with a hopper rated by the manufacturer at 10 lb. Hopper feed fits small recurring batches in one colour. State average powder use per batch and the number of consecutive parts when comparing configurations. Confirm the fluidisation equipment, hopper cleaning access and availability of injector and gun wear parts. Check the available space around the intended workstation.
COLOPrice on request - Manual unit · box feed · 7" touch panel
COLO-200S-B touchscreen powder coating unit with box feed
The COLO-200S-B is a manual touchscreen unit that feeds from the original powder box. This configuration suits orders with several colours in one shift. Ask to see the box change and the cleaning sequence for the injector, hose and gun. Confirm that your powder packaging fits the feed arrangement and that the quoted equipment covers it. For a trial, compare coverage on a flat face and an inside corner.
COLOPrice on request - Manual unit · stainless hopper · 7" touch panel
COLO-200S-H touchscreen powder coating unit with hopper
The COLO-200S-H combines touchscreen control with a separate powder hopper. It fits repeat workpieces coated in longer single-colour runs. Size the hopper to a typical batch and confirm how it is refilled and emptied. Check the fluidisation equipment and access to the injector. For an application trial, provide the powder type, part orientation and surfaces where even coverage matters.
COLOPrice on request - Manual unit · box feed · 100 kV
Vogamakina VG1E-VN manual powder coating unit with box feed
The Vogamakina VG1E-VN is a manual unit for shops that change colours frequently. The original box sits on a vibrating platform and an injector feeds powder to the gun. A wheeled stand lets the unit move to the working position. During a trial, time the exchange of two boxes you actually use and review how the powder path is cleaned. Confirm box fit, compressed-air requirements and supplied nozzles.
Vogamakina2 600 € (≈ 2 910 $) · net, delivery not included - Manual unit · 0–100 kV · 250 g gun
Elektrosprey manual electrostatic powder coating gun set
The Elektrosprey manual set applies electrostatic powder in a spray booth. It suits jobs where the operator works around several faces and edges of each part. Describe the powder, typical batch and frequency of colour changes. Check the included gun, controller, feed equipment and nozzles. Request a trial on a recessed part and a list of replacement consumables.
ElektrospreyPrice on request - Manual unit · box feed · 7" touch · 100 kV
ROMER ProfiSpray V Manual Powder Coating Unit
The ProfiSpray V is a manual powder applicator with box feed and a 7-inch control panel. This configuration suits a shop running short batches and frequent colour changes. On a frame with recessed corners, check film build on both the open faces and the recesses. Use the production powder and hanger for the trial. Time cleaning from the last part in the old colour to the first acceptable part in the next one. Confirm which nozzles and changeover accessories are included.
ROMERPrice on request - Manual unit · box feed · 110 kV
Gema OptiFlex Pro B manual box-feed powder coating unit OptiFlex® Pro B
The Gema OptiFlex Pro B is a manual unit fed from the original powder box. It fits small orders that alternate among several colours during the day. In a demonstration, change between two packages you use and review cleaning access to the suction tube, injector and hose. Confirm box fit and the nozzles needed for the parts you coat most often.
GemaPrice on request - Manual unit · 50 l hopper · 110 kV
Gema OptiFlex Pro F manual powder coating unit with 50 L hopper OptiFlex® Pro F
The Gema OptiFlex Pro F feeds from a 50 L fluidising hopper. It suits longer manual runs in one colour and batches with higher powder consumption. Specify typical powder use per batch and how the container will be refilled. Review hopper cleaning and test feed consistency with the powder you normally run.
GemaPrice on request - Manual unit · box feed · colour change in 35 s
Gema OptiFlex Pro Q manual powder unit for fast colour changes OptiFlex® Pro Q
The Gema OptiFlex Pro Q is designed for manual coating with frequent changes between short colour runs. Time the trial from the last part in the first colour to the first acceptable part in the next. That includes powder-path cleaning and work in the booth. Confirm the compressed-air connections and accessories supplied with the quoted build.
GemaPrice on request - Manual unit · 40 l hopper · 100 kV · up to 400 g/min
Gema OptiFlex GO manual powder coating unit OptiFlex® GO
The Gema OptiFlex GO is a manual unit for a shop coating varied parts at one workstation. Trial it on flat brackets and a part with an inside corner to assess access with the gun. Confirm the feed arrangement for the quoted version and the supplied nozzles. Ask for the gun and injector consumables suited to your workload.
GemaPrice on request - Manual unit · box feed · PEM-X1
Wagner Sprint 2 B manual powder coating unit with box feed
The Wagner Sprint 2 B is a manual unit with original-box feed and the PEM-X1 gun. It fits shops handling orders in several colours that need to move quickly to the next box. Trial a change between two of your powders and check access to the injector and hose. Give the supplier your usual box size and confirm the included nozzles and functions of the WACON Sprint 2 XE controller.
WagnerPrice on request - Manual unit · 60 l container · PEM-X1
Wagner Sprint 2 H manual powder coating unit with 60 L hopper
The Wagner Sprint 2 H is a manual unit with a 60 L stainless steel powder container and a PEM-X1 gun. The container suits consecutive batches in one colour where the operator uses a larger quantity of powder per run. Check refilling, fluidisation and container cleaning when selecting the unit. Describe a typical batch and the frequency of colour changes so supply, equipment and nozzles can be specified for the application.
WagnerPrice on request - Manual unit · box feed · Expert control
Wagner Sprint 2 Expert B manual box-feed powder coating unit
The Wagner Sprint 2 Expert B pairs original-box feed with WACON Sprint 2 Expert control. It suits manual jobs that change colours and part shapes while requiring repeatable settings. The Wizard and Digital Surface Optimizer assist with selecting and adjusting settings for the application. Supply a representative part and coating target for the trial. Specify the process records you need and confirm the interfaces and measurement options in the quote.
WagnerPrice on request - Manual unit with 60 l container and touchscreen control
Wagner Sprint 2 Expert H manual powder unit with 60 L hopper
The Wagner Sprint 2 Expert H feeds from a 60 L container and uses WACON Sprint 2 Expert control. This fits longer runs of recurring parts where coating settings and process data need to be retained. In a trial, compare coverage on flat faces and more complex areas with your normal powder. Confirm the equipment for tracking consumption, the links to documentation systems and the accessories needed for your parts.
WagnerPrice on request
Powder curing ovens
Batch and tunnel ovens that cure the powder at 160–220 °C – electric, natural gas / LPG, diesel or infrared. Compare working size, heating power and what the price includes.
- Batch oven · electric 6.5 kW
COLO-1688 compact electric powder curing oven
The COLO-1688 is an electric batch oven for curing powder on small runs of brackets, hardware and housings. COLO lists working dimensions of 1000 × 845 × 1600 mm in width, depth and height. A fan circulates air through the chamber. Check the height of the tallest hung part and the clear opening needed to load it. Provide your site supply and typical batch mass when requesting a configuration.
COLO2 430 $ (≈ 2 171 €) · per unit, delivery not included - Batch oven · electric 18 kW
COLO-1515 electric powder curing oven with 1.5 m cube chamber
The COLO-1515 is an electric oven with 1500 × 1500 × 1500 mm working dimensions. Its cubic chamber gives flexibility in how compact rims, grilles and housings are arranged. Space the parts so air can circulate through the load. Ask for the clear door opening, hanging layout and electrical requirements for your site. Match the useful oven envelope to the booth and carrier before selecting a complete setup.
COLOPrice on request - Batch oven · electric 18 kW · trolley
COLO-1864 electric powder curing oven with loading trolley
The COLO-1864 electric build with trolley loading handles batches of enclosures, frames and bulky parts. COLO publishes a chamber of 1600 × 1400 × 1800 mm in width, depth and height for the electric model. The trolley lets the batch be arranged outside the oven. Confirm the frame dimensions, payload and rail or wheel layout. Check the connected electrical load and the space needed in front of the door.
COLOPrice on request - Batch oven · electric 40 kW · top track
COLO-2447 batch powder curing oven with overhead track
The COLO-2447 is a batch oven for curing powder on suspended workpieces. With a coordinated track layout, the same carrier can transfer parts from the spray station into the oven. It suits batches of frames and panels of varying heights. Verify clearance below the track, carrier length and the door arrangement around the suspension. When adding the oven to an existing shop, provide the rail interface and current carrier drawing.
COLOPrice on request - Batch oven · electric 54 kW · 4.5 m
COLO-1645 electric powder curing oven with 4.5 m working depth
The COLO-1645 is an electric batch oven for long profiles and frames. COLO lists a 1500 × 4500 × 1650 mm chamber in width, depth and height. Allow for the carrier and clearances around the part when sizing the batch. Plan a straight approach for loading and unloading long parts through the door. Provide maximum batch mass, available supply and the fixture arrangement for a comparable quotation.
COLOPrice on request - Batch oven · gas / LPG · Riello burner
COLO-3210 gas powder curing oven with 3.1 m working depth
The COLO-3210 gas oven is intended for batches of panels and mid-length welded parts. The catalogue working envelope is 2000 × 3100 × 1900 mm in width, depth and height. Use loaded carrier dimensions and the desired time between batches when sizing the equipment. Confirm the gas type, connection and burner maintenance access. Compare quotes on usable chamber size, batch mass and the proposed loading system.
COLOPrice on request - Batch oven · gas · 6 m · two trolleys
COLO 20 ft gas powder curing oven for long parts
The COLO 20 ft gas batch oven is designed for long profiles, fence sections and frames. The manufacturer lists a 6 m working depth and a loading trolley for the catalogue build. Check the carrier length, approach to the door and space needed to withdraw a full batch. Include site fuel, batch weight and required working height so the supplier can quote the appropriate configuration.
COLOPrice on request - Batch oven · gas / LPG / diesel · 3 × 3 m
COLO floor-level walk-in powder curing oven
This COLO walk-in oven is built for loading at shop-floor level. It suits trolley handling of heavy frames or bulky parts into the chamber. Confirm the threshold detail, foundation requirements and wheel loading for the proposed installation. Provide the loaded trolley mass and clear dimensions along its route. Request an installation drawing showing the usable entrance and door arrangement so the oven can be planned with the booth and staging area.
COLOPrice on request - Batch oven · electric, gas or diesel · made to size
Vogamakina box-type powder curing oven
The Vogamakina box oven cures powder on complete batches. The manufacturer describes forced air circulation and builds matched to the heating source. Its batch format allows different products to be scheduled around their respective requirements. Specify the largest load, working chamber dimensions, site power or fuel and how carriers enter the oven. Ask for temperature distribution data under a representative load.
VogamakinaPrice on request - Tunnel oven · conveyor · electric, gas or diesel
Vogamakina tunnel oven for continuous powder curing
The Vogamakina tunnel oven cures conveyor-borne workpieces by convection. Heated length is designed with conveyor speed and the time the part needs to reach and hold the temperature specified for its powder. Provide part mass, thickness and carrier spacing for the project. Confirm entry and exit openings, heating source and how the part temperature profile will be checked with the line loaded.
VogamakinaPrice on request - Infrared · catalytic gas or electric
Vogamakina industrial infrared oven for coating lines
The Vogamakina infrared oven is a heating module for coated parts in a continuous line. Emitter placement is planned around the surfaces to heat and the travel speed. For recessed shapes or parts with varying mass, supply samples to check the metal temperature profile. Establish whether the module will gel the coating ahead of a convection zone or serve another project function. Confirm working width, power supply and zone controls.
VogamakinaPrice on request - Batch oven · electric 3–150 kW · made to size
Elektrosprey electric box-type powder curing oven
The Elektrosprey electric box oven cures powder in batches. Select working volume around parts, carriers and the spacing within a load. Specify the largest batch, loading arrangement and available electrical supply. Ask for temperature distribution data with a loaded chamber and check manoeuvring room in front of the door.
ElektrospreyPrice on request - Continuous oven · natural gas / LPG · 50 000–500 000 kcal/h
Elektrosprey gas powder curing oven with overhead pallet transport
The Elektrosprey gas oven carries parts on pallets through the curing zone. It suits workpieces processed on fixtures with defined support points. Specify loaded pallet dimensions, maximum mass and feed direction. Review the loading area, fixture contact with the coated part and the quoted gas connection requirements.
ElektrospreyPrice on request - Batch oven · electric · forced circulation
ROMER SL Electric Powder Curing Oven
The SL is an electric oven for curing powder coatings. Chamber airflow and the programmable temperature cycle let the shop set a recipe for the workpiece and powder. For fence panels, specify the usable envelope with the trolley or hanging system in place. Thin slats and heavier frames warm at different rates in a mixed load. Assess part-metal temperature against the coating specification. Request the connected electrical load and a heat-up trace for representative parts. Confirm whether the data logger and chamber divider are included.
ROMERfrom 8 200 € (≈ 9 177 $) · net - Batch oven · natural gas / LPG / oil · 240–460 mm insulation
ROMER SW Burner-Heated Powder Curing Oven
The SW is a burner-heated oven for curing powder coatings. ROMER describes gas and oil configurations selected for the plant and chamber size. For batches of steel frames, compare the complete cycle with the same load. Account for heat-up after loading, the time the parts spend within the powder's cure window and idle time between batches. Confirm the fuel, burner rating and exhaust provisions for the proposed installation. Ask for a trial-cycle record using the intended loading pattern.
ROMERfrom 60 500 € (≈ 67 706 $) · net - Batch oven for long parts, Riello burner
COLO-5219 gas or diesel batch powder curing oven
The COLO-5219 is a batch oven for curing powder on long metalwork. Select the gas or diesel build around the fuel available on site and the load of a typical batch. Size the chamber around the part together with its trolley or hanging fixture. Obtain the specified burner type, usable length and maintenance clearances in writing so quotes describe the same configuration.
COLOPrice on request