Rack upright roll forming lines

Lines that punch, roll form and cut pallet-rack uprights from coil – with the punch in the line or as a separate punching section.

• Upright line · up to 5 mm · up to 30 m/min

  Gasparini TWIN / PRO pallet rack upright roll forming line

  The Gasparini line forms the uprights that determine the beam mounting pitch in a pallet rack. Provide the section range, slot drawing and expected lot sizes when discussing a TWIN or PRO configuration. Confirm the tooling change procedure across sizes and check a sample upright with the rack beam connector.

  Gasparini

  Price on request
• Upright line · strip up to 500 × 3.5 mm

  DREISTERN rack upright roll forming system

  DREISTERN can integrate strip perforation ahead of the upright forming passes. Rotary or press punching can be specified to suit the hole pattern and production brief. Check the finished slots against the beam connector and set longitudinal tolerances for uprights that carry several beam levels.

  DREISTERN

  Price on request
• Upright line · 1.5–3 mm · 10–20 m/min

  Linbay roll forming line for perforated pallet rack uprights

  The Linbay line forms rack uprights with perforations for beams at different elevations. Define the section, hole geometry and repeating pitch when specifying tools. Confirm how width changes are made and how the first hole is located relative to the cut. At acceptance, fit a connector from your rack system in several positions along the upright.

  Linbay

  Price on request
• Upright line · up to 2.5 mm · up to 30 m/min

  Zhongtuo pallet rack upright roll forming line

  Zhongtuo's line forms steel pallet rack uprights with a repeated hole pattern for beam connectors. Define the cross-section, slot shape and pitch, and the distance from the end of the upright to the first slot. A trial length assembled with the matching connector and base plate will show whether the perforation and end positions line up as required.

  Zhongtuo

  Price on request
• Upright line · 1.6–2.5 mm · 6–10 m/min

  Tacon YX82 rack upright roll forming machine, 83/103/122 mm

  The YX82 is Tacon's catalog offering for roll forming steel rack uprights. The listing gives sizes of 83, 103 and 122 mm. Match them to the section drawing and confirm the tooling and setup changes for each size. Check the longitudinal hole positions against the beam connector before defining the production series.

  Tacon Forming Machinery

  Price on request