Tacon YX82 rack upright roll forming machine, 83/103/122 mm
The YX82 is Tacon's catalog offering for roll forming steel rack uprights. The listing gives sizes of 83, 103 and 122 mm. Match them to the section drawing and confirm the tooling and setup changes for each size. Check the longitudinal hole positions against the beam connector before defining the production series.
Price on request
Manufacturer: Tacon Forming Machinery · China
Technical specification
| Profile | width 83 / 103 / 122 mm, flange 82 mm |
|---|---|
| Material | 1.6–2.5 mm galvanised or hot-rolled coil, Q235 / Q300 |
| Forming speed | 6–10 m/min |
| Roll former | 22 roller groups, rollers Cr12 HRC 58–62, shafts 40Cr Ø75–95 mm |
| Main motor | 22 kW, gearbox drive |
| Punching | servo feeder + separate 100 t punching machine |
| Cutting | hydraulic, 5.5 kW – the line stops while punching and cutting |
| Decoiler | hydraulic, 6.0 t, strip ≤ 350 mm, coil ID Ø508 mm, OD ≤ Ø1200 mm |
| Accuracy | length ±1.0 mm; section ≤ ±2 mm; contour ≤ 1 mm/m |
| Line size / weight | 30 × 2.5 × 2.5 m / 10 t |
| Power supply | 380 V, 3 phases, 50 Hz |
| Manufacturer | Xiamen Tacon Forming Machinery Co., Ltd., Xiamen, Fujian, China |
Standard equipment
- Hydraulic decoiler 6 t
- Feeding and levelling unit
- Servo feeder and separate 100 t punching press
- 22-station roll former, 22 kW, gearbox drive
- Hydraulic cut-off 5.5 kW
- Run-out table 6 m
- PLC counting of lengths and quantities
Similar machines
- Upright line · up to 5 mm · up to 30 m/min
Gasparini TWIN / PRO pallet rack upright roll forming line
The Gasparini line forms the uprights that determine the beam mounting pitch in a pallet rack. Provide the section range, slot drawing and expected lot sizes when discussing a TWIN or PRO configuration. Confirm the tooling change procedure across sizes and check a sample upright with the rack beam connector.
GaspariniPrice on request - Upright line · strip up to 500 × 3.5 mm
DREISTERN rack upright roll forming system
DREISTERN can integrate strip perforation ahead of the upright forming passes. Rotary or press punching can be specified to suit the hole pattern and production brief. Check the finished slots against the beam connector and set longitudinal tolerances for uprights that carry several beam levels.
DREISTERNPrice on request - Upright line · 1.5–3 mm · 10–20 m/min
Linbay roll forming line for perforated pallet rack uprights
The Linbay line forms rack uprights with perforations for beams at different elevations. Define the section, hole geometry and repeating pitch when specifying tools. Confirm how width changes are made and how the first hole is located relative to the cut. At acceptance, fit a connector from your rack system in several positions along the upright.
LinbayPrice on request - Upright line · up to 2.5 mm · up to 30 m/min
Zhongtuo pallet rack upright roll forming line
Zhongtuo's line forms steel pallet rack uprights with a repeated hole pattern for beam connectors. Define the cross-section, slot shape and pitch, and the distance from the end of the upright to the first slot. A trial length assembled with the matching connector and base plate will show whether the perforation and end positions line up as required.
ZhongtuoPrice on request