Linbay roll forming line for perforated pallet rack uprights
The Linbay line forms rack uprights with perforations for beams at different elevations. Define the section, hole geometry and repeating pitch when specifying tools. Confirm how width changes are made and how the first hole is located relative to the cut. At acceptance, fit a connector from your rack system in several positions along the upright.
Price on request
Manufacturer: Linbay · China
Technical specification
| Material thickness | 1.5–3.0 mm |
|---|---|
| Yield strength | 250–350 MPa (tensile 350–500 MPa) |
| Forming speed | 10–20 m/min (usually about 20 m/min) |
| Forming stations | 18–26 (depending on the profile drawing) |
| Punching | hydraulic punching station; punching press – option |
| Cutting | post-cutting; pre-cutting – option |
| Size change | automatic by motors, width and height |
| Rollers / drive | steel #45 (GCr15 option) · chain drive (gearbox option) |
| Control | Siemens PLC, Yaskawa inverter (Siemens option) |
| Delivery | 80–100 days, depending on the drawing |
| Warranty | 2 years for the whole line, 5 years for the motor |
| Manufacturer | Wuxi Linbay Machinery Co., Ltd., Wuxi, Jiangsu, China |
Standard equipment
- Manual decoiler (hydraulic – option)
- Hydraulic punching station
- Roll former with forged-iron stations, chain drive
- Rollers of steel #45
- Post-cutting
- Siemens PLC, Yaskawa inverter
Similar machines
- Upright line · up to 5 mm · up to 30 m/min
Gasparini TWIN / PRO pallet rack upright roll forming line
The Gasparini line forms the uprights that determine the beam mounting pitch in a pallet rack. Provide the section range, slot drawing and expected lot sizes when discussing a TWIN or PRO configuration. Confirm the tooling change procedure across sizes and check a sample upright with the rack beam connector.
GaspariniPrice on request - Upright line · strip up to 500 × 3.5 mm
DREISTERN rack upright roll forming system
DREISTERN can integrate strip perforation ahead of the upright forming passes. Rotary or press punching can be specified to suit the hole pattern and production brief. Check the finished slots against the beam connector and set longitudinal tolerances for uprights that carry several beam levels.
DREISTERNPrice on request - Upright line · up to 2.5 mm · up to 30 m/min
Zhongtuo pallet rack upright roll forming line
Zhongtuo's line forms steel pallet rack uprights with a repeated hole pattern for beam connectors. Define the cross-section, slot shape and pitch, and the distance from the end of the upright to the first slot. A trial length assembled with the matching connector and base plate will show whether the perforation and end positions line up as required.
ZhongtuoPrice on request - Upright line · 1.6–2.5 mm · 6–10 m/min
Tacon YX82 rack upright roll forming machine, 83/103/122 mm
The YX82 is Tacon's catalog offering for roll forming steel rack uprights. The listing gives sizes of 83, 103 and 122 mm. Match them to the section drawing and confirm the tooling and setup changes for each size. Check the longitudinal hole positions against the beam connector before defining the production series.
Tacon Forming MachineryPrice on request